| Sl.No | Name of Author | Title of paper | Name of Journal/Proceedings | Year of publication | volume/Issue | Page number | ISSN | Impact Factor |
|---|---|---|---|---|---|---|---|---|
| 1 | Sharanappa Godiganur | Experimental Investigations Of Diesel Engine Using Fish Oil Biodiesel And Its Blends With Isobutanol As An Additive | International Journal of Research in Engineering and Technology | 2014-15 | 3 | 458-463 | 2321-7308 | |
| 2 | Sharanappa Godiganur | Sour Garcina(GarcinaGummigutta) as a source of biodiesel in India” | International journal of scientific & engineering research | 2014-15 | 8 | 364-368 | 2229-5518 | |
| 3 | Manjunath L H | Studies on Effect of Heat Treatment and Ice Quench Age Hardening on Microstructure, Strength, Abrasive Wear Behavior of Al6061- MWCNT Metal Matrix Composites | International Journal of Engineering Research & Technology (IJERT) | 2014-15 | 17 | 1-6 | 2278-0181 | 0.85 |
| 4 | Manjunath L H | Optimized Technique of Operating Parameters to Improve Performance on Compression Ignition Engine using Neem Biodiesel | International Journal of Engineering Research & Technology (IJERT) | 2014-15 | Issue-17 | 1-4 | 2278-0181 | 0.85 |
| 5 | Raju B S | Modelling and Analysis of Centralized Spring | International Journal of Engineering Research & Technology (IJERT) | 2014-15 | 17 | 1-5 | 2278-0181 | 0.85 |
| 6 | Raju B S | Experimental Investigation of Static Pressure Distribution on the Flat Surface Due to Impingement of Air Jets | International Journal of Engineering Research & Technology (IJERT) | 2014-15 | 17 | 1-8 | 2278-0182 | 0.85 |
| 7 | Jegadeeswaran | Oxidation Resistance HVOF Sprayed Coating 25% (Cr3C2- 25(Ni20Cr)) + 75%NiCrAlY on Titanium Alloy | Procedia Materials Science | 2014-15 | 17 | 11-20 | 0.55 | |
| 8 | Jegadeeswaran | Improving Hot Corrosion Resistance of Cobalt Based Superalloy (Superco-605) Using HVOF Sprayed Oxide Alloy Powder Coating | Transactions of the Indian Institute of Metals | 2014-15 | 3 | 309-316 | https://doi.org/10.1007/s12666-015-0605-x | 1.43 |
| 9 | Somasundaram B | Evaluation of cyclic oxidation and hot corrosion behaviour of HVOF sprayed WC-Co/NiCrAlY coating | Journal of Thermal Spray Technology | 2014-15 | 6 | 1000-1008 | https://doi.org/10.1007/s11666-014-0112-3 | 2.757 |
| 10 | Somasundaram B | Hot corrosion behaviour of HVOF sprayed (Cr3C2-35% NiCr) + 5% Si coatings in the presence of Na2SO4 - 60% V2O5 at 700ºC | Transactions of the Indian Institute of Metals | 2014-15 | 2 | 257-268 | https://doi.org/10.1007/s12666-014-0453-0 | 1.43 |
| 11 | Somasundaram B | Evaluation of Thermocyclic Oxidation Behavior of HVOF Sprayed (Cr3C2-35% NiCr) + 5% Si Coatings on Boiler Tube Steels | Procedia Materials Science | 2014-15 | 2 | 398-407 | https://doi.org/10.1016/j.mspro.2014.07.282 | 0.55 |
| 12 | Somasundaram B | Evaluation of Thermocyclic Oxidation Behavior of HVOF Sprayed WC-CrC-Ni Coatings | Bonfring International Journal of Industrial Engineering and Management Science | 2014-15 | 2 | 83-89 | 2277-5056 | 0.622 |
| 13 | Mahesh L | Fabrication of TiO2 Reinforced Aluminum Metal Matrix Composites through P/M Process | International Journal of Engineering Research & Technology (IJERT) | 2014-15 | 18 | 1-3 | 2278-0181 | 0.85 |
| 14 | Niranjan Hiremath | Bearing Fault Detection Using Acoustic Emission Signals Analysed by Empirical Mode Decomposition | IJRET: International Journal of Research in Engineering and Technology | 2014-15 | 3 | 426-431 | DOI: 10.15623/ijret.2014.0315084 | 7.87 |
| 15 | Shivasharanyya swamy | Application of the Power Spectral Density for Damage Identification and Location in Beam Structures | International Journal of Engineering Research & Technology (IJERT) | 2014-15 | 17 | 1-6 | 2278-0181 | 0.85 |
| 16 | Dr Suresha S | Dynamic Analysis of Beam with A Breathing Crack | International Journal of Engineering Research & Technology (IJERT) | 2014-15 | 17 | 1-6 | 2278-0181 | 0.85 |
| 17 | Dr.K S Narayanaswamy | Study on Flatwise Compression Behaviour of Open- Cell Polymer Foam Sandwich Structure | International Journal of Engineering Research & Technology | 2014-15 | 17 | 1-5 | 2278-0181 | 0.85 |
| 18 | Dr.K S Narayanaswamy | Buckling Characteristics of Open cell Polymer Foam Sandwich Structure | Procedia Materials Science | 2014-15 | 17 | 1906-1914 | https://doi.org/10.1016/j.mspro.2014.07.512 | 0.55 |
| 19 | C Rajesh Babu | Thermal stress Analysis Of a gas turbine casing using FEA | OSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) | 2014-15 | 4 | 32-37 | 2278-1684 | 8.02 |
| 20 | Manjunath L H | Microstructure and Mechanical properties of Al6061-Cenosphere-Tin based MMC’s” International Journal of Science, Technology & Management | International Journal of Science, Technology & Management | 2014-15 | 1 | 228-234 | 2394-1537 | |
| 21 | Santhosh B D | The comparison of the effects of different whitening toothpastes on the micro hardness of a nano hybrid composite resin | journal of conservative dentistry | 2014-15 | 6 | 550-554 | DOI: 10.4103/0972-0707.144593 | 4.15 |
| 22 | Sharanappa Godiganur | Performance and Emission Characteristics of Methyl Esters of Mahua Oil Blended with Diesel | International Journal of Engineering Research & Technology | 2015-16 | 17 | 1-4 | 2278-0181 | 0.85 |
| 23 | Sharanappa Godiganur | Development Of Biodiesel from the Oil of Garcinia Gummigutta (Sour Garcinia) by Transesterification | International Journal of Engineering Research & Technology | 2015-16 | 17 | 1-5 | 2278-0182 | 0.85 |
| 24 | Sharanappa Godiganur | Effect of Injection Pressure on the Performance and Emission Characteristics of DI Diesel Engine Fueled with Fish Oil Methyl Ester (FOME) -Blended Diesel Fuel | International Journal of Engineering Research & Technology | 2015-16 | 17 | 1-5 | 2278-0183 | 0.85 |
| 25 | Sharanappa Godiganur | Niger Seed (Guizotia Abyssinica) as a Source of Biodiesel in India”, | International Journal of Engineering Research & Technology | 2015-16 | 17 | 1-4 | 2278-0184 | 0.85 |
| 26 | Sharanappa Godiganur | Experimental Investigations on performance and Emission of a CI Engine Fueled with Milk Dairy Waste Scum Oil Biodiesel” | Indian Journals | 2015-16 | 1 | 27-37 | 2278-0181 | 2.375 |
| 27 | Raju B S | Development and characterization of h-BN-Gr-Cenosphere Al6061 hybrid metal matrix composites | International Journal For Technological Research In Engineering | 2015-16 | 10 | 2905-2908 | 2347 -4718 | 1.4264 |
| 28 | Hampali | Study of Wear Properties on Polyester and Natural Fibers (Jute and Hemp) Reinforced Polymer Matrix Composites | International Journal of Engineering Research & Technology | 2015-16 | 17 | 1-5 | 2278-0181 | 0.85 |
| 29 | Hampali | Investigation Of Mechanical Properties Of Polyester Reinforced With Hemp Fibre (Long Fibres And Mat) For Patellar Implant Application | International Journal of Mechanical Engineering and Technology | 2015-16 | 1 | 154-163 | 0976-6359 | 1.04 |
| 30 | Hampali | Investigation on Basic Mechanical Properties of Jute Reinforced Polyester Composites for Patellar Implant Application | International Journal Of Scientific Research And Education | 2015-16 | 12 | 4681-4686 | 2321-7545 | 2.47 |
| 31 | Niranjan Hiremath | Health Monitoring of Surface Wear of TiN and AlCrN Based PVD Coated Bearings Using Statistical Values of Vibration Signals | Journal of Materials Science & Surface Engineering | 2015-16 | 4 | 312-315 | 2348-956 | 0.75 |
| 32 | Niranjan Hiremath | Design of Special Purpose Machine for Drilling and Reaming | International Research Journal of Engineering and Technology | 2015-16 | 6 | 1542-1548 | 2395 -0056 | 0.85 |
| 33 | Gururaja Sharma T | Reviewing Product Lifecycle Management Through Definition,Structure, Analysis, Strategies, Implementation and Application(DSASIA) | International Journal of Engineering Research & Technology | 2015-16 | 7 | 1-9 | 2278-0182 | 0.85 |
| 34 | Gururaja Sharma T | Experimental study on flux & sisal hybrid composites reniforced with epoxy | International Journal For Technological Research In Engineering | 2015-16 | 10 | 2536-2540 | 2347 -4718 | 1.4264 |
| 35 | Gururaja Sharma T | Design & Development of of wheel chair cum bed | 3rd International Conference on Recent Innovations in Science Engineering & management | 2015-16 | 1 | 527-540 | 2347 -4718 | |
| 36 | Gururaja Sharma T | Damping test on flax &sisal hybrid composites reinforced with epoxy resin | International Journal For Technological Research In Engineering | 2015-16 | 10 | 2536-2540 | 2348 -4718 | 1.4264 |
| 37 | Gururaja Sharma T | An experimental study on Jutereinforced epoxy composites | International Journal For Technological Research In Engineering | 2015-16 | 10 | 2536-2540 | 2349 -4718 | 1.4264 |
| 38 | K S Narayanaswamy | Stress Analysis of Steering of a Fighter Aircraft | International Journal For Technological Research In Engineering | 2015-16 | 6 | 1217-1222 | 2395-0072 | 0.51 |
| 39 | Manjunatha G | Energy Absorption Capacity Of Axially Compressed Aluminium Tubes Under Quasi Static Condition: An Experimental Study |
International Research Journal of Engineering and Technology | 2015-16 | 4 | 2621-2625 | 2395-0072 | |
| 40 | Manjunath L H | Development and Characterisation of Aluminium-Graphene Metal Matrix Composites using powder metallurgy route | International Journal For Technological Research in Engineering | 2015-16 | 10 | 52-59 | 2395-0072 | 1.4264 |
| 41 | Shivasharanyya swamy | Solar based air compressor for car/bike tire inflate | International Journal For Technological Research In Engineering | 2015-16 | 10 | 2697-2701 | 2347 -4718 | 1.4264 |
| 42 | Naveen krishna C | Optimization of WEDM Process Parameters on Duplex 2205 steel using Grey Relational Analysis | Journal of Emerging Technologies and Innovative Research | 2015-16 | 12 | 08 to 12 | 2249-6645 | |
| 43 | Anand S N | Development and Implementation of BEM Solution for 3- D Arbitrary Shaped conduction Bodies Using Face Based Basis Functions | International Journal of Engineering Research | 2015-16 | 6 | 1129 - 1254 | 2319-6890 | 3.843 |
| 44 | Somasundaram B | High temperature corrosion behavior of HVOF sprayed WC-CrC-Ni coatings | International Journal of Surface Science and Engineering | 2016-17 | 4 | 400-413 | https://doi.org/10.1504/IJSURFSE.2016.077542 | 1.178 |
| 45 | Hampali | CFD Analysis On The Performance Of Wind Turbine With Nozzles | International Journal For Technological Research In Engineering | 2016-17 | 7 | 185-189 | 2277-8616 | 0.43 |
| 46 | Hemanth K | Influence Of Tensiletest Three Point Bending Test Impact Test Brinell Hardness Testwater Absorption Test On Coir/Glass Fiber Epoxy Composite | International Journal of Advances in Scientific Research and Engineering | 2016-17 | 5 | 133-146 | 2454-8006 | 1.11 |
| 47 | Hemanth K | Study Of Static And Frequency Responsible Analysis Of Hangers | International Journal of Advances in Scientific Research and Engineering | 2016-17 | 5 | 157-162 | 2454-8006 | 1.11 |
| 48 | Mahesh L | Studies on Titanium Nitride Reinforced Aluminium Metal Matrix Composites | International Journal of Mechanical Engineering and Technology | 2016-17 | 3 | 114-122 | 0976-6359 | 1.04 |
| 49 | Mahesh L | Compaction, Sintering and Characterization of TiC Reinforced Aluminum Metal Matrix Composites | SSRG International Journal of Mechanical Engineering (SSRG - IJME) | 2016-17 | 2 | 23-27 | 2348 -8360 | 1.04 |
| 50 | Mahesh L | Development and Characterization of Titanium Nitride Reinforced Aluminium MMC’s through Powder Metallurgy Technique | Mechanics and Mechanical Engineering âƒc Lodz University of Technology |
2016-17 | 3 | 29-36 | http://dx.doi.org/10.1007/s11665-009-9458-y | 0.55 |
| 51 | Niranjan Hiremath | An Integrated Tribological and Vibration Signal Behaviour of TiN and AlCrN based PVD Coatings for Roller Bearings | Indian Journal of Science and Technology | 2016-17 | 47 | 01--08 | DOI:10.17485/ijst/2015/v8i1/107938 | 0.113 |
| 52 | Niranjan Hiremath | Study Of Mechanical And Morphological Properties On Glass Fiber Reinforcement Polyester Composite With Graphene | International Journal of Advances in Scientific Research and Engineering (ijasre) | 2016-17 | 5 | 82-87 | 2454 - 8006 | 1.11 |
| 53 | Shivasharanyya swamy | Fabrication And Investigation Of Tensile And Bending-Mechanical And Oxidative Biodegradation Properties Of Hybrid Natural Fibre Reinforced Bio-Composites |
International Journal of Mechanical Engineering and Technology (IJMET) | 2016-17 | 1 | 01--14 | 0976-6359 | |
| 54 | Shivasharanyya swamy | Study Of Mechanical Properties On Glass Fibre Reinforced Polymer Matrix Material With Self- Healing Agent | International Journal of Advances in Scientific Research and Engineering(ijasre) | 2016-17 | 5 | 96-102 | 2454 - 8006 | 1.11 |
| 55 | Shivasharanyya swamy | The Study on Static and Dynamic Properties on Hemp Natural Fiber Reinforce Polyester Composite Material | International Journal of Advances in Scientific Research and Engineering (ijasre) | 2016-17 | 5 | 126-132 | 2455 - 8006 | 1.11 |
| 56 | Balaji.S | Influence of Propyl Gallate Antioxidant on Performance and Emissions of a CI Fuelled with Neem Oil Biodiesel | Indian Journals | 2016-17 | 2 | 62/70 | 0976-4763 | 2.375 |
| 57 | Dr Suresha S | Sensitizing The Multiple Damage Identification In Beam Structure Using Hoelder Exponent And Wavelets | IOP Conference Series: Materials Science and Engineering | 2016-17 | 1 | 12153 | doi:10.1088/1757-899X/149/1/012153 | 0.51 |
| 58 | Vijee Kumar | Optimization of Process Parameter in seat hard facing Process for an I.C Engine valves | International Journal of Engineering Research & Technology | 2016-17 | 7 | 207-211 | 2278-0181 | 0.5 |
| 59 | Vijee Kumar | Development And Characterization Of Copper Metal Matrix Composite By Powder Metallurgy Technique |
International Journal of Advances in Scientific Research and Engineering (ijasre) | 2016-17 | 5 | 147-156 | 2454 - 8006 | 1.11 |
| 60 | Ashwini M V | Design and Fabrication of Domestic Puffed Rice Making Machine | International journal of Engineering Research & Technology |
2016-17 | 8 | 428-432 | 2278-0181 | 0.5 |
| 61 | Robinson P | Synthesis and Characterization of Spark Plasma Sintered Al - 4.5wt. % Cu Alloy Powder | International Journal of Engineering Research & Technology (IJERT) | 2016-17 | 7 | 1 to 8 | 2278-0181 | 0.5 |
| 62 | Robinson P | Effects of CeO2 and Al2O3 Nanoparticles Added to Diesel in a Four Stroke Single Cylinder CI Engine | International Journal of Research and Scientific Innovation (IJRSI) | 2016-17 | 7 | 15-18 | 2321-2705 | 0.81 |
| 63 | K S Narayanaswamy | Low Cycle Fatigue Life Estimation Of A Turbine Blisk | International Journal of Advances in Scientific Research and Engineering | 2016-17 | 5 | 18-22 | 2454-8006 | 1.11 |
| 64 | K S Narayanaswamy | Life Estimation Of Urbine Blisk Of A Gas Turbine Engine | Indian Journal of Science and Technology | 2016-17 | 4 | 23-27 | 2454-8006 | 0.113 |
| 65 | Sachin Prabha | Fabrication and Characterization of Metal Matrix Composites using Al6063, Graphite and Cenosphere | Journal of Materials Science & Surface Engineering | 2016-17 | 6 | 463-466 | DOI:10.15623/ijret.2016.0533002 | 0.75 |
| 66 | Karthik S | Investigation of Stresses & Deflection of Composite Wind Turbine Blade Spar With and Without Delamination for Different Orientation of Fiber’s | International Journal of Scientific & Engineering Research | 2016-17 | 4 | 184-190 | 2229-5518 | 3.4 |
| 67 | Sachin Prabha | Solar grass cutter machine | International Journal For Technological Research In Engineering | 2016-17 | 10 | 2702-2706 | 2347-4718 | 1.4264 |
| 68 | Veerbhadrappa | Performance Study on Diesel Engine by Using Waste Chicken Fat Biodiesel | International Journal of Research in Engineering and Technology | 2016-17 | Special Issue 21 | 94-98 | 2321-7308 | |
| 69 | Shivasharanyya swamy | Investigation of Mechanical Properties on 10% ofAl2O3 and 10% of ZrO2 with polyurethane resinPolymer Composite as an Orthopedic Implant | International Journal of Advances in Scientific Research and Engineering | 2016-17 | 6 | 428-437 | 2395-1052 | |
| 70 | Shivasharanyya swamy | Study of Wear properties and Microstructural Analysis on 10% of Al2O3 and 10% of ZrO2 with Polyurethane Resin Polymer Composite as an Orthopedic Implant | International Journal of Advances in Scientific Research and Engineering | 2016-17 | 6 | 443-451 | 2395-1052 | |
| 71 | Manjunath L H | Development And Characterization Of Curaua Fibers/ Glass Fibers Polyester Composites | International Journal of Advances in Scientific Research and Engineering | 2016-17 | 5 | 88-95 | 2454 - 8006 | 1.11 |
| 72 | Anand S N | Explicit Dynamic Analysis Of Automotive Bus Body Structure During Catastrophic Frontal Crash With Expulsion System |
International Journal of Advances in Scientific Research and Engineering | 2016-17 | 5 | 109-117 | 2454-8006 | 1.11 |
| 73 | Sharanappa Godiganur | Box-Behnken Response Surface Methodology for Optimization of Process Parameters for Dairy Washed Milk Scum Biodiesel Production | Bio fules | 2017-18 | 5(1) | 01-Dec | DOI: 10.1080/17597269.2018.1461511 | 2.956 |
| 74 | Sharanappa Godiganur | “Fabrication and Experimental Analysis of Vortex Tube by Varying the Geometry and Material” | IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) | 2017-18 | 4 | 17-25 | 2278-1684 | 8.02 |
| 75 | Sharanappa Godiganur | Bio-diesel based diluents improve cold flow properties of Dairy washed milk-scum biodiesel”, | Renewable Energy | 2017-18 | 4 | 168-174 | DOI: 10.1016/j.renene.2017.03.092 | 8.001 |
| 76 | Sharanappa Godiganur | Experimental Investigation of a low heat rejection (LHR) engine powered with Mahua oil methyl ester (MOME) with exhaust gas recirculation (EGR). | Journal Biofuels |
2017-18 | 6 | 747-756 | https://doi.org/10.1080/17597269.2017.1345356 | 2.956 |
| 77 | Sharanappa Godiganur | Characterization of small capacity CI engine operated on blends of fish oil methyl ester | International Journal of Advanced Research Trends in Engineering and Technology (IJARTET) | 2017-18 | 6 | 747-756 | 2394-3777 | |
| 78 | Manjunath L H | Development of Low Cost Rolling Machine | International Journal of Advances in Scientific Research and Engineering | 2017-18 | 3 | 68-76 | 2395-1052 | |
| 79 | Raju B S | Conceptual Design and Prototyping of Radio Piloited Air vehicle | International Journal for Science and Advance Research In Technology | 2017-18 | 6 | 582-588 | 2395-1052 | 1.11 |
| 80 | Raju B S | Development and Characterization of Al7075+Gr+Hbn Metal Matrix Composite through Stir Casting | International Journal for Science and Advance Research In Technology | 2017-18 | 5 | 599-564 | 2395-1052 | 1.11 |
| 81 | Jegadeeswaran | Characterization and hot corrosion studies on plasma sprayed (WC-CO)/(CR3C2-NICR) coating on titanium and special steel alloys | International Journal of Mechanical Engineering and Technology (IJMET) | 2017-18 | 5 | 1168-1176 | 0976-6359 | |
| 82 | Somasundaram B | Reducing The Rejection Rate Of Pistons During Machining |
International Journal of Mechanical Engineering and Technology (IJMET) | 2017-18 | 5 | 227-237 | 0976-6359 | 1.04 |
| 83 | Somasundaram B | Erosion Behaviour Of Hvof Sprayed (Cr3c2-35%Nicr) +5%Si Coatings |
International Journal of Mechanical Engineering and Technology (IJMET) | 2017-18 | 9 | 237-243 | 0976-6359 | 1.04 |
| 84 | N Naga Suresh Babu | Process Optimization Through Quality Tools | International Journal for Science and Advance Research In Technology | 2017-18 | Issue 8 | 1124-1134 | 2395-1052 | 1.11 |
| 85 | Mahesh L | A study of microstructure and wear behaviour of Titanium Carbide reinforced aluminium metal matrix composites | International Journal of Advances in Scientific Research and Engineering (ijasre) | 2017-18 | 6 | 607-616 | 2454-8006 | 1.11 |
| 86 | Mahesh L | Design and fabrication of remote Controlled Portable Vacuum Gripper | International Journal for Science and Advance Research In Technology | 2017-18 | 1 | 42-49 | 2395-1052 | 1.11 |
| 87 | Niranjan Hiremath | Experimental Studies to Assess Surface Wear Using Grease Degradation, Bearing Temperature and Statistical Parameter of Vibration Signals in a Roller Bearing | materials study proceedings | 2017-18 | 6 | 571-573 | https://doi.org/10.1016/j.matpr.2017.07.180 | 1.24 |
| 88 | Niranjan Hiremath | Experimental Computations to Assess Surface Wear in Roller Bearing Using Integrated Approach of Vibration Analysis and Spectroscopic Techniques | Journal of Engineering and Applied sciences | 2017-18 | 8 | 8370-8377 | DOI: 10.36478/jeasci.2017.6152.6156 | 0.855 |
| 89 | Dharamendara M | The Role Of Laser Treatment Hvof Coating To Prevent Hot Corrosion On Industrial Turbines |
International Journal of Mechanical Engineering and Technology (IJMET) | 2017-18 | Special Issue 2 | 6152-6156 | 0976-6359 | 1.04 |
| 90 | Jegadeeswaran N | The Role Of Laser Treatment Hvof Coating To Prevent Hot Corrosion On Industrial Turbines |
nternational Journal of Mechanical Engineering and Technology (IJMET) | 2017-18 | 8 | 866-873 | 0976 - 6340 | 1.04 |
| 91 | Shivasharanyya swamy | Damage detection and identification in beam structure using modal data and wavelets, World Journal of Modelling and Simulation | World Journal of Modelling and Simulation | 2017-18 | Issue 8 | 866-873 | 1 746-7233 | 0.105 |
| 92 | Shivasharanyya swamy | Delamination Detection in Composite Wind Turbine Blade Spar Model By Using Spatial Signal Processing, International Journal of Mechanical Engineering and Technology | International Journal of Mechanical Engineering and Technology (IJMET) | 2017-18 | 1 | 52-65 | 0976-6359 | 1.04 |
| 93 | Balaji.S | Influence Of Pyrogallol Antioxidant On Performance And Emissions Of A Ci Fuelled With Neem Oil Biodiesel |
International Journal of Mechanical Engineering and Technology (IJMET) | 2017-18 | 8 | 931-950 | 0976-6359 | 1.04 |
| 94 | Balaji.S | Experimental Investigation of Joule - Thomson Effect | International Journal for Science and Advance Research In Technology | 2017-18 | Special Issue 8 | 981-987 | 2395-1052 | 1.11 |
| 95 | Ramesh Kumar S C | Studies on mechanical properties of graphene based hybrid composites reinforced with kenaf/glass fiber | AIP Conference Proceedings | 2017-18 | 5 | 506-510 | https://doi.org/10.1063/1.5029691 | 0.4 |
| 96 | Ramesh Kumar S C | Preparation and Analysis of Flexural Strength of Epoxy Based Hybrid Composites Reinforced with Banana/Graphene/Glass Fiber | International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE) | 2017-18 | 1 | DOI: 01.1617/vol5/iss5/pid41536 | ||
| 97 | Lakshmi Narayana K S | Study of Corrosion Properties of SIC and EGLASS reinforced al-3003 Hybrid MMC | International Journal for Researchin Applied Science & Engineering Techn | 2017-18 | 5 | 01 to 04 | 2321-9653 | |
| 98 | Lakshmi Narayana K S | Study of Wear Properties of SiC Particulate And E-Glass Fiber Reinforced Al 3003 Hybrid Metal Matrix Composites | International Journal of Mechanical Engineering and Technology (IJMET) | 2017-18 | 9 | 298-309 | 2395-6011 | |
| 99 | Lakshmi Narayana K S | Fabrication of Automated Pneumatic Board Cleaning System | International Journal of Mechanical Engineering and Technology (IJMET) | 2017-18 | 7 | 362-369 | 139725609 | |
| 100 | Suresha S | Study Of Sensitivity Of Mode Shapes In Damage Identification Using Continuous Wavelet Transform |
ARPN Journal of Engineering and Applied Sciences | 2017-18 | 1 | 130-139 | 1819-6608 | 0.57 |
| 101 | Suresha S | Experimental Based Crack Identification In Aircraft Wing Stiffened Panel Using Wavelet Algorithm |
International Journal of Mechanical Engineering and Technology (IJMET) | 2017-18 | 9 | 293-304, | 212577907 | 1.04 |
| 102 | Vijee Kumar | Study on Properties of Multiwall carbon nanotube and Graphite Reinforced Aluminium 6061 Hybrid composites | International Journal of Advances in Scientific Research and Engineering (ijasre) | 2017-18 | 15 | 4539-4545 | 2454 - 8006 | 0.5 |
| 103 | Vijee Kumar | Design and Fabrication of stair Climbing Trolley, | International Journal for Science and Advance Research In Technology | 2017-18 | 8 | 874 - 881 | 2395-1052 | 1.11 |
| 104 | Ashwini M V | Design And Development Of Plastic Recycling Machine |
International Journal for Science and Advance Research In Technology | 2017-18 | Special Issue 8 | 101-106 | 2395-1052 | 1.11 |
| 105 | Robinson P | Development of Renewable Energy based Hybrid System for Electricity Generation-A Case Study | International Journal of Mechanical Engineering and Technology (IJMET) | 2017-18 | 5 | 349-354 | 2278-2540 | 0.5 |
| 106 | Shanawaz Patil | Evaluation of Mechanical Properties of Ultra High Molecular Weight Polyethylene Reinforced with TiO2 Particles | International Journal of Advances in Scientific Research and Engineering (ijasre) | 2017-18 | 5 | 349-354 | 2454 - 8006 | |
| 107 | Shanawaz Patil | Solar Powered Smart Vehicle for Physically Disabled People | International Journal for Science and Advance Research In Technology | 2017-18 | 8 | 46-52 | 2395-1052 | 0.5 |
| 108 | Shanawaz Patil | Brief Review on Aluminum Metal Matrix Composite | International Journal for Science and Advance Research In Technology | 2017-18 | 1 | 130-139 | 2395-1052 | 0.5 |
| 109 | Sharan Teja Reddy | Design and Fabrication of Lever Operated Water and Pesticide Sprayer | International Journal for Science and Advance Research In Technology | 2017-18 | 5 | 1640-1642 | 2395-1052 | 0.5 |
| 110 | Sharan Teja Reddy | Design and Fabrication of Fertilizer and Pesticides Spreader | International Journal for Science and Advance Research In Technology | 2017-18 | 5 | 1722-1724 | 2395-1052 | 0.5 |
| 111 | K S Narayanaswamy | Design and Analysis of Hair Pin Heat Exchanger Using TiC, MgO, Ag/Water-Glycerin Nano Fluids | International Journal of Engineering Research & Technology | 2017-18 | 5 | 445-449 | 2278-0181 | 0.5 |
| 112 | K S Narayanaswamy | Life Estimation Of Turbine Blisk For A Gas Turbine Engine |
International Journal of Mechanical Engineering and Technolog | 2017-18 | 5 | 469-472 | 0976-6359 | 0.5 |
| 113 | Srinivas s | Experimental Studies On The Energy Absorption Capacity Of Axially Compressed Metal Tubes |
International Journal of Mechanical Engineering and Technology (IJMET) | 2017-18 | 1 | 1-007 | 0976-6340 | 1.04 |
| 114 | Pradip Gunaki | A Concept for Eco-Friendly Sanitary System in Indian Railways | International journal of Advances in Scientific research and Engineering | 2017-18 | 8 | 393-399 | 2454 - 8006 | 1.04 |
| 115 | Sharath G S | Design, Development, Motion Simulation And Analysis Of Roller With Coil Lifter For Heavy Coil Wrapping Machine |
International Journal of Mechanical Engineering and Technology (IJMET) | 2017-18 | 11 | 38-47 | 0976-6359 | 1.11 |
| 116 | Kalyana Kumar M | Experimental Investigation on IC Engine Aluminum Piston With Zirconium Coating To Enhance Its Mechanical Properties | International Journal for Science and Advance Research In Technology | 2017-18 | Special Issue 5 | 197-203 | 2395-1052 | 1.04 |
| 117 | Kalyana Kumar M | Performance Evaluation of the of Bio Fuels Derived From Waste Cooked Oil and Pongamia Pinnata | International Journal for Science and Advance Research In Technology | 2017-18 | 11 | 30-37 | 2454-8006 | |
| 118 | Vinod R | Experimental Study Of Secondary Wick As A Heat Pipe |
International Journal of Mechanical Engineering and Technology (IJMET) | 2017-18 | 4 | 787-791 | 0976-6359 | 1.11 |
| 119 | Vinod R | Performance and emission characteristics of a CNG-Biodiesel dual fuel operation of a single cylinder four stroke CI engine | IOP Conf. Series: Materials Science and Engineering | 2017-18 | 1 | 453-459 | doi:10.1088/1757-899X/376/1/012028 | 1.04 |
| 120 | Praveen Math | Innovative Methods To Enhance The Performance Of Solar Cooker—A Review |
International Journal for Science and Advance Research In Technology | 2017-18 | 8 | 1157-1165 | 2395-1052 | 0.51 |
| 121 | Avinash S | A Study on Mechanical Properties of Silk Fiber Reinforced Epoxy Resin Bio-Composite with SiC as Filler Addition | Materials Today: Proceedings | 2017-18 | 1 | 1 to 18 | https://doi.org/10.1016/j.matpr.2018.01.131 | |
| 122 | Anand Babu K | Experimental Investigation for the Heat Transfer of a Double Pipe Heat Exchanger | International Journal of Mechanical Engineering and Technology (IJMET) | 2017-18 | Special Issue 9 | 339-342 | 976-6359 | 1.24 |
| 123 | Manjunatha G | Experimental Studies On The Energy Absorption Capacity Of Axially Compressed Metal Tubes |
International Journal of Mechanical Engineering and Technology (IJMET) | 2017-18 | 1 | 3219-3228 | 0976-6359 | 1.04 |
| 124 | Pavan D | A Study on Process Development & Machine Time Optimization of Edge Insert | International Journal for Science and Advance Research In Technology | 2017-18 | 8 | 203-210 | 2395-1052 | 1.04 |
| 125 | Madhu B P | CFD Analysis of Convergent-Divergent and Contour Nozzle | International Journal of Mechanical Engineering and Technology | 2017-18 | 11 | 38-47 | 0976-6359 | 1.7494 |
| 126 | Madhu B P | Numerical And Experimental Investigation Of Orifice Meter For Different Beta-Ratio | International Journal for Science and Advance Research In Technology | 2017-18 | 6 | 558-562 | 2395-1052 | 1.04 |
| 127 | Madhu B P | Numerical and Experimental Analysis of Aerofoil for Unmanned Air Vehicle (UAV) | International Journal for Science and Advance Research In Technology | 2017-18 | 8 | 670-677 | 2395-1052 | 1.7494 |
| 128 | Nitin H S | Cylic Oxidation and hot corrosion behavior of plasma sprayed CoCrAlY + WC-Co coating on turbine alloys | Journal failure analysis and prevention | 2017-18 | 5 | 300-304 | https://doi.org/10.1007/s11668-018-0499-0 | 1.7494 |
| 129 | Shanawaz Patil | A Brief Review on Graphene-Metal Matrix Nano Composite And Its Applications | International Journal for Science and Advance Research In Technology | 2017-18 | 5 | 364-370 | 2395-1052 | 0.926 |
| 130 | Shanawaz Patil | Evaluation of Mechanical Properties of Ultra High Molecular Weight Polyethylene Reinforced with TiO2 Particles | International Journal of Advances in Scientific Research and Engineering | 2017-18 | 4 | 1133-1142 | 2454 - 8006 | 5.47 |
| 131 | Manjunath. C | Fabrication of Turbocharger For Two Wheeler | International Journal for Science and Advance Research In Technology | 2017-18 | 6 | 617-620 | 2395-1052 | 1.7494 |
| 132 | Channabasav | Microstructure and Hardness Studies on AMC’s Welded by FSW | International Journal for Science and Advance Research In Technology | 2017-18 | 1 | 130-139 | 2395-1052 | 1.7494 |
| 133 | Robinson P | Mobile Operated In-Built Hydraulic Jack For Automobiles | International Journal for Science and Advance Research In Technology | 2017-18 | 6 | 589-592 | 2395-1052 | 5.47 |
| 134 | Robinson P | Characterization And Performance Studies On Natural Fibre Reinforced Polymer Composites With Nano Alumina Fillers App Controlled Pneumatic Jack | International Journal for Science and Advance Research In Technology | 2017-18 | 6 | 515-519 | 2395-1052 | |
| 135 | Raju B S | Optimization of Process Parameters of Inconel 600 using Taguchi’s Technique | International Journal for Science and Advance Research In Technology | 2017-18 | 6 | 174-176 | 2395-1052 | |
| 136 | Shivasharanyya swamy | Design and Fabrication of Machine for Test in Abrasive Wearing According to ASTM G 65 Standard | International Journal for Science and Advance Research In Technology | 2017-18 | 6 | 455-459 | 2395-1052 | |
| 137 | Shivasharanyya swamy | Low Velocity Impact Analysis on Fibre Reinforced Polymer Composite Material | International Journal for Science and Advance Research In Technology | 2017-18 | 6 | 593-598 | 2395-1052 | |
| 138 | Arunkumar H | Detection of Packet Dropping Attacks for Privacy Preservation in Wireless Ad-Hoc Networks |
International Journal for Science and Advance Research In Technology | 2017-18 | 6 | 780-782 | 2321-0613 | |
| 139 | Arunkumar H | Protected and Capable of Data Communication System for Wireless Network |
International Journal for Science and Advance Research In Technology | 2017-18 | 6 | 563-566 | 2349-6002 | |
| 140 | Arunkumar H | Conversion of Furnace Oil Fired Boiler to Briquette Fired Boiler | International Journal for Science and Advance Research In Technology | 2017-18 | 10 | 283-285 | 2395-1052 | |
| 141 | Shreyas P S | Design and Fabrication of Multi Nut Remover | International Journal for Science and Advance Research In Technology | 2017-18 | 7 | 339-344 | 2395-1052 | |
| 142 | Kumaraswamy. K. L | CFD Analysis ofT Pipe Junction inNuclear Reactor Cooling Circuit | International Journal of Innovative Research in Science, Engineering and Technology | 2017-18 | 5 | 1717-1721 | 2319-8753 | |
| 143 | Venkatesha B K | Design and Fabrication of Automatic Window Cleaner | International Journal for Science and Advance Research In Technology | 2017-18 | 6 | 1428-1430 | 2395-1052 | 1.7494 |
| 144 | Vishwanath K H | Regenerative Braking System On Hawk I Aircraft |
International Journal for Science and Advance Research In Technology | 2017-18 | 12 | 22389-98 | 2395-1052 | |
| 145 | Vijee Kumar | Fabrication and studies on mechanical properties of multi walled carbon nanotube reinforced aluminium 6061 hybrid composites | International Journal of Advances in Scientific Research and Engineering | 2017-18 | 6 | 617-620 | 2454 - 8006 | |
| 146 | Madhu G | Studies on Electrochemical Corrosion Resistance of HVOF Coating for Boiler Material | International Journal for Science and Advance Research In Technology | 2017-18 | 5 | 322-325 | 2395-1052 | 1.7494 |
| 147 | Anand S N | Study of Effect of Metal Delivery Tube on Flow characteristics of Fluids and Melt in Convergent-Divergent nozzle used for Gas Atomization Process using CFD techniques | International Journal for Research in Applied Science & Engineering Technology | 2017-18 | 1 | 101-106 | 2321-9653 | |
| 148 | Sharanappa Godiganur | Acetone and Diethyl ether: Improve cold flow properties of dairy washed milkscum biodiesel, | Renewable Energy | 2018-19 | 1 | 446-451 | https://doi.org/10.1016/j.renene.2018.06.051 | 0.435 |
| 149 | Sharanappa Godiganur | Extraction of straight oil and Development of Methyl Esyer of sour Garcinia straight oil by Transesterification Process” | International Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 197-202 | 2349-5162 | |
| 150 | Sharanappa Godiganur | Combustion,performance and emission characteristics of dairy-washed milk scum biodiesel in duel cylinder compression ignition engine | Energy Sources, Part A: Recovery, Utilization, andEnvironmental Effects | 2018-19 | 1 | https://doi.org/10.1080/15567036.2019.1618996 | ||
| 151 | Sharanappa Godiganur | Comparative study on the effect of Nanoadditives with biodiesel blend on the performance and emission charecteristics of a Laboratory CI engine | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD |
2018-19 | 4 | 1067-1074 | 2249-8001 | |
| 152 | Sharanappa Godiganur | Investigating HVAC Thermal Comfort and Energy Efficiency in Commercial buildings | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD |
2018-19 | 1 | 319-328 | 2249-8001 | |
| 153 | Sharanappa Godiganur | diethyl ether on the performance and emission characteristics of CI engine fueled with milk scum biodiesel blend” | Energy Sources, Part A: Recovery, Utilization, andEnvironmental Effects | 2018-19 | 1 | Jan-18 | https://doi.org/10.1080/15567036.2019.1618996 | 10.2746 |
| 154 | Sharanappa Godiganur | Investigating HVAC Thermal Comfort and Energy Efficiency in Commercial buildings” | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD |
2018-19 | 1 | 319-328 | 2249-8001 | |
| 155 | Sharanappa Godiganur | Review of HVAC thermal comfort and energy efficiency in commercial buildings using air recirculating system | International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) |
2018-19 | 11 | 305-309 | 2455-2585 | 10.2746 |
| 156 | Manjunath L H | The Performance Optimization of Deep Cryogenically Treated M2 HSS Tool in Turing of C45 Steel for Hardness and MRR | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD |
2018-19 | 8 | 911-920 | 2249-8001 | |
| 157 | Manjunath L H | Influence Of Albite & Copper Particulates On Mechanical Properties Of Aluminium Oxide Based Composites |
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 903-910 | 2249-8001 | |
| 158 | Manjunath L H | Influence Of Albite Particulate Reinforcement On Mechanical Properties Of Aluminum Oxide (Al2o3) By Powder Metallurgy Technique |
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 235-242 | 2249-8001 | |
| 159 | Manjunath L H | MECHANICAL CHARACTERIZATION OF EPOXY/POLYETHYLENE FIBER -REINFORCED COMPOSITES | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 221-226 | 2249-8001 | |
| 160 | Manjunath L H | Investigation Of Machinability Characteristics On C45 Steel Alloy While Turning With Untreated And Cryotreated M2 Hss Cutting Tools |
ARPN Journal of Engineering and Applied Sciences | 2018-19 | 8 | 271-276 | 1819-6608 | |
| 161 | Manjunath L H | Effect Of Process Parameters On Wear Behavior And Water Absorption Of Uhmwpe Fabric Reinforced Epoxy Composites | International Journal of Mechanical Engineering and Technology (IJMET) | 2018-19 | 1 | 1 to 11 | 0976-6359 | 0.57 |
| 162 | Manjunath L H | Investigation of machinability characteristics on C45 steel with cryogenically treated M2 HSS tool using statistical technique | International Journal for Simulation and Multidisciplinary Design Optimization | 2018-19 | 1 | 543-549 | https://doi.org/10.1051/smdo/2019006 | 1.04 |
| 163 | Manjunath L H | Application Potential of Fuzzy and Regression in Optimization of MRR and Surface Roughness during Machining of C45 Steel | Periodica Polytechnica Mechanical Engineering | 2018-19 | A2 | 01--18 | https://doi.org/10.3311/PPme.13171 | 0.89 |
| 164 | Manjunath L H | Fuzzy Logic And Regression Modelling Of Machining Parameters In Turning Using Cryo-Treated M2 Hss Tool |
International Journal of Mechanical Engineering and Technology | 2018-19 | 2 | 132-139 | 0976-6359 | |
| 165 | Manjunath L H | Mechanical and Wear behaviour of Al6061 reinforced with Graphite and TiC Hybrid MMC’s | Materials Research Innovations | 2018-19 | 10 | 200-210 | https://doi.org/10.1080/14328917.2019.1628497 | 1.04 |
| 166 | Raju B S | Optimizing The Rapid Prototyping (Stereolithography) Process Parameter by Fusion of Taguchi Method and Grey Relational Analysis | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 3 | 01--08 | 2249-8001 | |
| 167 | Raju B S | Design and fabrications of electric bike. | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD |
2018-19 | 6 | 654-658 | 2349-5162 | |
| 168 | Raju B S | Design and Fabrication of power train and suspension for electric bike | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD |
2018-19 | 8 | 325-337 | 2349-5162 | |
| 169 | Jegadeeswaran | Mechanical Characterization And Three Body Abrasive Wear Of Al2o3/Tio2 Particulate Filled Plain Woven Glass Epoxy Composites |
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 535-540 | 2249-8001 | |
| 170 | Jegadeeswaran | Comparative Oxidation Studies On High Velocity Oxy-Fuel Sprayed Cermets Coatings On Gas Turbine Alloys 800ºC |
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 426-432 | 2249-8001 | |
| 171 | Jegadeeswaran | Oxidation Resistance by HVOF Coating on Gas Turbine Martensite Steel Material | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD |
2018-19 | 8 | 542-548 | 2249-8001 | |
| 172 | Somasundhar B | Evaluation Of Erosion Behavior Of Cr3c2-Nicr And Wc-Co Coatings On Boiler Tube Materials |
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 243-250 | 2249-8001 | |
| 173 | Somasundaram B | Solid Particle Erosion Behavior of HVOF Sprayed Wc-Crc-Ni Coating | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 974-979 | 2249-8001 | |
| 174 | Somasundaram B | Erosion Rate Of Hvof Sprayed Crc-Nicrfesibcoc (80%-20%) Coatings Of Comparison With Substrate Metal Ss-316 |
International Journal of Mechanical Engineering and Technology (IJMET) | 2018-19 | 8 | 928-934 | 0976-6359 | |
| 175 | Somasundaram B | Better erosion resistance of hvof sprayed crc-nicrfesibcoc (35%-65%) and crc-nicrfesibcoc(80%-20%) coatings |
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD |
2018-19 | 8 | 385-393 | 2249-8001 | |
| 176 | Somasundaram B | CORROSION STUDIES OF HVOF COATED BOILER TUBE MATERIALS | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 894-902 | 2349-5162 | |
| 177 | Somasundaram B | Development Of Hvof Coating To Protect Material From Wear In Turbines |
Journal of Emerging Technologies and Innovative Research | 2018-19 | 1 | 1427-1436 | 2349-5162 | |
| 178 | N Naga Suresh babu | A Quality Tool Set In The Operations -A Need For Health Organization |
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 1 | 607-616 | 2249-8001 | |
| 179 | N Naga Suresh babu | Machinability Studies Of Titanium Coatings On Tungsten Carbide Inserts |
Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 580-588 | 2349-5162 | |
| 180 | N Naga Suresh babu | Machinability Studies on PVD Coated Carbide Tools | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 371-376 | 2349-5162 | |
| 181 | S. Devaraj | MICROSTRUCTURAL STUDY OF AL-4.5 WT. % CU ALLOY PROCESSED THROUGH DIFFERENT CASTING TECHNIQUES | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 6 | 958-963 | 2249-8001 | |
| 182 | Devaraj S | MICROSTRUCTURE & MECHANICAL CHARACTERIZATION OF Al-Si ALLOY | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 161-167 | 2349-5162 | |
| 183 | Hampali | Design and Development of Electro Magnetic Braking System with Ultrasonic Sensor | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 269-275 | 2349-5162 | |
| 184 | Hampali | Wear Analysis of Polymer Composites for Biomaterials | Journal of Emerging Technologies and Innovative Research | 2018-19 | 8 | 227-234 | 2349-5162 | |
| 185 | Hampali | FABRICATION AND EXPERIMENTAL EVALUATION OF HEAT PIPE USING Γ-ALUMINIUM OXIDE NANO FLUID | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 234-242 | 2249-8001 | |
| 186 | LR Jagadeesh | EFFECT OF ROCKWELL HARDNESS IMPACT TREATMENT ON TIG WELDED COMPONENTS OF IN718 | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 391-395 | 2249-8001 | |
| 187 | L R Jagadeesh | OPTIMIZATION OF INDOOR AIR CIRCULATION OF CLASSROOM USING CFD. | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 203-209 | 2349-5162 | |
| 188 | Hemanth K | DESIGN AND FABRICATION OF WASTE SEGREGATING SMART-BIN | International Journal for Science and Advance Research In Technology | 2018-19 | 8 | 583-586 | 2395-1052 | |
| 189 | Hemanth K | Vibration control of a quarter cars model using sky-hook controlled air suspension | International Journal of Mechanical and Production Engineering Research and Development | 2018-19 | 8 | 175-180 | 2249-8001 | |
| 190 | Hemanth K | MAGNETO STATIC ANALYSIS OF MR FLUID BRAKE | International Journal for Science and Advance Research In Technology | 2018-19 | 6 | 132-137 | 2395-1052 | |
| 191 | Hemanth K | Automatic Ground Clearance Using Speed and Detection Sensing Mechanism | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 689-692 | 2349-5162 | |
| 192 | Shamanth | Influence of Heat Treatment on Cr and Fe Rich Precipitates in Thermally Aged Duplex Steel | Emerging Materials Research | 2018-19 | 8 | 301-305 | doi/abs/10.1680/jemmr.18.00004 | 5.87 |
| 193 | Mahesh L | Investigation of the Microstructure and Wear Behaviour of Titanium Compounds Reinforced Aluminium Metal Matrix Composites | Materials Research Express | 2018-19 | 5 | 416-422 | DOI:10.1088/2053-1591/aaec4e | 0.64 |
| 194 | Mahesh L | Study on Physical and Mechanical Properties of Titanium Compound Reinforced Aluminium MMCs | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 6 | 83-89 | 2249-8001 | |
| 195 | Mahesh L | Design and Fabrication of Multipurpose Steam Jet Washer | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 3 | 1 to 25 | 2349-5162 | |
| 196 | Mahesh L | Design of Automated Drip Irrigation System | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 2 | 26516 | 2349-5162 | |
| 197 | Mahesh L | Development of Polargraph Device | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 295-300 | 2349-5162 | |
| 198 | Mahesh L | Design and Development of Power Generation Using Suspension System, | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 623-626 | 2349-5162 | |
| 199 | Dharmendra M | Hot Corrosion Resistance of HVOF Sprayed Laser Treatment Coating on Ti-15 Alloy in Molten Salt Environment at 7000C | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 316-319 | 2249-8001 | |
| 200 | Dharmendra M | Development of Laser Heat Treatment HVOF Coating to Combat Oxidation on Gas Turbines | Materials Today Proceedings | 2018-19 | 5 | 320-322 | https://doi.org/10.1016/j.matpr.2018.10.294 | 0.7 |
| 201 | Dharamendra M | EMBEDDED BASED AUTOMATIC GRASS CUTTING MACHINE BY SOLAR ENERGY | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 311-315 | 2349-5162 | |
| 202 | Dharamendra M | SOLAR POWERED HACKSAW MACHINE WITH SAFETY FEATURE | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 795-802 | 2349-5162 | |
| 203 | Shivasharanyya swamy | EVALUATION OF MECHANICAL PROPERTIES OF E-GLASS FIBRE REINFORCED POLYMER MATRIX COMPOSIT USED AS IMPLANT FOR TIBIA BONE | International Journal of Mechanical Engineering and Technology (IJMET) | 2018-19 | 11 | 24937-24943 | 0976-6359 | |
| 204 | Shivasharanyya swamy | Application of MAC in Delamination Identification for PMC | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 90-95 | 2249-8001 | |
| 205 | Balaji.S | Biodiesel Production From Azadirachta Indica Oil And Its Process Optimization | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 10 | 1295-1303 | 2249-8001 | |
| 206 | Balaji.S | Semi-Automatic Water Tank Cleaner | Journal of Emerging Technologies and Innovative Research | 2018-19 | 4 | 964-973 | 2349-5162 | |
| 207 | Sachinkumar | APPLICATION OF TAGUCHI TECHNIQUE TO OPTIMIZE THE CUTTING PARAMETERS FOR TURNING OF AA6351 WITH AND WITHOUT HEAT TREATMENT | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 2 | 7 to 24 | 2249-8001 | |
| 208 | Varadaraj K R | Comparative Study of the Mechanical Properties of Al6061 with Graphite undergoing Equal Channel Angular Pressing | Journal of Emerging Technologies and Innovative Research | 2018-19 | 8 | 952-957 | 2349-5162 | |
| 209 | Varadaraj K R | TEMPERATURE MEASUREMENTS DURING ROTARY DRILLING OPERATIONS - A REVIEW | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 61-66 | 2249-8001 | |
| 210 | Lakshmi Narayana K S | MECHANICAL AND TRIBOLOGICAL BEHAVIOR OF E-GLASS FIBER REINFORCED ALUMINUM MATRIX COMPOSITES PRODUCED BY STIR CASTING ROUTE: A REVIEW | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) | 2018-19 | 6 | 921-927 | 2249-8001 | |
| 211 | Lakshmi Narayana K S | Effect of Fly Ash on Aluminum Matrix Composites Produced by Stir Casting Route: A Review | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 544-549 | 2349-5162 | |
| 212 | Naveen krishna C | Study on Mechanical Properties and Corrosion Behaviour of Bio-Polymer Metal Matrix Composite | Journal of Emerging Technologies and Innovative Research | 2018-19 | 8 | 503-506 | 2349-5162 | |
| 213 | Veerbhadrappa | Effect of injection pressure and addition of diethyl ether on the performance and emission characteristics of ci engine fuelled with milk scum biodiesel blend | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 39-50 | 2249-8001 | |
| 214 | Veerbhadrappa | A study on effect of exahaust gas recirculation on the performance and emission characteristics of a CI engine using milk scum bio diesel as a fuel | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 489-499 | 2349-5162 | |
| 215 | Suresh.S | Design and Fabrication of Pedal Operated Reciprocating Water Pump and Filtering System | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 516-522 | 2349-5162 | |
| 216 | Vijee Kumar | Design and fabrication of Multipurpose Agricultural Machine, | International Journal for Science and Advance Research In Technology | 2018-19 | 6 | 297-302 | 2395-1052 | |
| 217 | Vijee Kumar | Synthesis and Microstructural Characterization of copper coated multi walled carbon nanotubes and graphene reinforced Aluminium hybrid composites" | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 211-220 | 2249-8001 | |
| 218 | Vijee Kumar | " Effect of Heat Treatment and Reinforcements on Mechanical Properties of Aerospace Grade Aluminium Composites at Elevated Temperatures | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 96-107 | 2249-8001 | |
| 219 | Vijee Kumar | Evaluation of Wear behaviour of Aluminium hybrid nano metal matrix composites fabricated by Powder metallurgy technique. | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 6 | 67-72 | 2349-5162 | |
| 220 | Ashwini M V | THE DEVELOPMENT OF A COMPACT STRAIN TESTING EQUIPMENT | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 6 | 629-632 | 2249-8001 | |
| 221 | Ashwini M V | "DESIGN AND FABRICATION OF SOLAR POWERED AUTOMATIC VERTICAL SHREDDING MACHINE AS A FEED FOR COMPOSTING" | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 945-951 | 2349-5162 | |
| 222 | Ashwini M V | "Design and Fabrication of Digital Puffed Rice Maker" | Journal of Emerging Technologies and Innovative Research | 2018-19 | 8 | 433-441 | 2349-5162 | |
| 223 | Robinson P | “An Evaluation of Conceptual Design of Compact Stain Equipment for High Temperature Applications” | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 988-992 | 2249-8001 | |
| 224 | Robinson P | DESIGN AND FABRICATION OF PYRAMID SOLAR STILL | Journal of Emerging Technologies and Innovative Research | 2018-19 | Issue 8 | 93-102 | 2349-5162 | |
| 225 | Robinson P | "BI-MODAL MICROCELLULAR MORPHOLOGY EVALUATON IN POLYCARBONATE FOAMS DEVELOPED USING TWO-STEP DEPRESSURIZATION FOAMING PROCESS" | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 439-444 | 2349-5162 | |
| 226 | Sharan Teja Reddy | THE SYNTHESIS AND CHARACTERISATION OF SILICON NITRIDE AND GRAPHITE REINFORCED ALUMINIUM HYBRID METAL MATRIX COMPOSITES: A REVIEW | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 228-233 | 2249-8001 | |
| 227 | Arunkumar H | Design and Study of Hovercraft with Remote Control and Camera | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | Issue 8 | 195-202 | 2249-8001 | |
| 228 | Arunkumar H | Fabrication of Intelligent Braking system using Pneumatic cylinder | International Journal for Science and Advance Research In Technology | 2018-19 | 5 | 616-622 | 2395-1052 | |
| 229 | Arunkumar H | PROCESS IMPROVEMENT STUDY ON FEED PUMP ASSEMBLY LINE | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 500-507 | 2349-5162 | |
| 230 | Arunkumar H | Inventory Optimization in Manufacturing Industry | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 889-893 | 2349-5162 | |
| 231 | K S Narayanaswamy | Investigation on Heat Transfer Properties of Water based TiO2-ZnO Nanofluids | IOP Conference Series | 2018-19 | 8 | 51-56 | doi:10.1088/1757-899X/455/1/012092 | 5.87 |
| 232 | K S Narayanaswamy | Numerical Analysis of Heat Transfer Characteristics using Nickel and Copper Nanofluids | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 230-232 | 2249-8001 | |
| 233 | K S Narayanaswamy | Design and Analysis of Double Pipe Heat Exchanger with Copper Nano Fluid | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 249-256 | 2249-8001 | |
| 234 | Srinivas s | Effect of SAE20W40 Oil and SAE120 Oil on the Performance of Journal Bearing | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) | 2018-19 | 5 | 385-390 | 2249-8001 | |
| 235 | Channabasav | EFFECT OF DIFFERENT WORKING FLUIDS ON ORGANIC RANKINE CYCLE FOR LOW-GRADE WASTE HEAT RECOVERY SYSTEM | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 01-009 | 2249-8001 | |
| 236 | Channabasav | FABRICATION OF NATURAL COOLING CABINET | Journal of Emerging Technologies and Innovative Research | 2018-19 | 8 | 338-350 | 2349-5162 | |
| 237 | Channabasav | NUMERICAL ANALYSIS OF HEAT TRANSFER THROUGH FINS | Journal of Emerging Technologies and Innovative Research | 2018-19 | 8 | 85-90 | 2349-5162 | |
| 238 | Manjunath S H | EVALUATION OF MECHANICAL PROPERTIES OF ALUMINIUM-6061, 4% GRAPHITE MMCs USING CENTRIFUGAL CASTING AND STIR CASTING | Journal of Emerging Technologies and Innovative Research | 2018-19 | 8 | 315-324 | 2349-5162 | |
| 239 | Manjunath S H | Automatic Pneumatic Bumper With Backward Movement of Seat | Journal of Emerging Technologies and Innovative Research | 2018-19 | 8 | 287-294 | 2349-5162 | |
| 240 | Pradip Gunaki | From Waste to Energy Concept by Modifying Bio-toilet System in Indian Railways | International Journal of Mechanical and Production | 2018-19 | 5 | 607-611 | 2249-8001 | 1.25 |
| 241 | Pradip Gunaki | Design and Fabrication of Pendulum Operated Pump | Journal of Emerging Technologies and Innovative Research (JETIR) | 2018-19 | 5 | 612-615 | 2349-5162 | |
| 242 | Pradip Gunaki | Design And Fabrication Of Automatic Coconut Brown Skin Remover | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 470-476 | 2349-5162 | |
| 243 | Karthik S | A REVIEW ON HIGH-PERFORMANCE NANO-HYDROPHOBIC COATINGS IN TRIBOLOGICAL APPLICATIONS | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 210-214 | 2249-8001 | |
| 244 | Sharath G S | MECHANICAL CHARACTARIZATION AND MODAL ANALYSIS OF JUTE/E-GLASS FIBER REINFORCED EPOXY HYBID COMPOSITE | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | Special Issue 8 | 358-362 | 2249-8001 | |
| 245 | Kalyana Kumar M | To Study the Mechanical Properties of Aluminium Piston using Zirconium Dioxide |
Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 150-155, | 2349-5162 | |
| 246 | VInod R | A Review on the Oxidation Stability of VOME | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 150-155 | 2249-8001 | |
| 247 | Vinod R | Influence of MWCNT Addition on the Performance and Emission Characteristics of A Diesel Engine Operated on Honege Oil Methyl Ester | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 412-417 | 2278-0181 | |
| 248 | Sachin Prabha | THE DEVELOPMENT AND CHARACTERIZATION OF PMCS USING POLYESTER, HEMP AND CALCIUM SILICATE | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 251-258 | 2249-8001 | |
| 249 | Sachin Prabha | Investigation of Epoxy Based Pmc for Wheel Rim Applications | International Journal for Science and Advance Research In Technology | 2018-19 | 5 | 541-545 | 2395-1052 | |
| 250 | Praveen Math | Effect of Injection Pressure on Performance Ans Emisssion Characteristics Studies on Ci Engine Using Methyl Ester of Neem Oil as Fuel | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 203-210 | 2249-8001 | |
| 251 | Avinash S | A Comparative Study of Polymeric Bio-Composites for Futuristic Bone Implant Application - A Review | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 7 | 01-004 | 2249-8001 | |
| 252 | Shreyas P S | A PREDICTION OF FATIGUE LIFE IN GFRP COMPOSITE LAMINATES SUBJECTED TO LOW VELOCITY IMPACT | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 402-411 | 2249-8001 | |
| 253 | Shreyas P S | EVALUATION of WEAR PROPERTY for ALUMINIUM BASED HYBRID MMC’s REINFORCED WITH NANO AL2O3 & ZrO2 CERAMIC PARTICLES | Journal of Emerging Technologies and Innovative Research (JETIR) | 2018-19 | 5 | 511-514 | 2349-5162 | |
| 254 | Varun Kumar Reddy | Investigation of Influence of Injector Opening Pressure and Nozzle Geometry on the Performance and Emission Characteristics of DI Diesel Engine with CAOME | European Journal of Sustainable Development Research | 2018-19 | 8 | 520-527 | 2542-4742 | 1.25 |
| 255 | Varun Kumar Reddy | EXPERIMENTAL INVESTIGATION TO DESIGN ACTIVE COOLING SYSTEM FOR PHOTOVOLTAIC CELL | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 369-380 | 2249-8001 | |
| 256 | Varun Kumar Reddy | Microcontroller Based Fish Catching Machine | Journal of Emerging Technologies and Innovative Research | 2018-19 | 8 | 363-368 | 2349-5162 | |
| 257 | Varun Kumar Reddy | Experimental investigation to improve the performance of cooling tower for various configurations | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 677-682 | 2349-5162 | |
| 258 | Dasharath S M | Effect of Cryoforging on Mechanical Properties of Low SFE Cast Brass | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 4 | 01-Nov | 2249-8001 | |
| 259 | Venkatesha B K | MECHANICAL PROPERTIES OF WOVEN BAMBOO/E-GLASS FIBER REINFORCED EPOXY HYBRID COMPOSITES | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 167-174 | 2249-8001 | |
| 260 | Venkatesha B K | Effect of Fiber Orientation on Mechanical Properties of Woven Bamboo/E-Glass Fiber Reinforced Epoxy Hybrid Composites | International Journal of Research in Advent Technology | 2018-19 | 5 | 19-23 | 2321-9637 | |
| 261 | Manjunath C | THE CFD SIMULATION FOR TURBULENT FLOW PAST NACA0012 AEROFOIL | International Journal of Mechanical and Production Engineering Research and Development | 2018-19 | 5 | 01 to 04 | 2249-8001 | |
| 262 | Shamanth V | Influence of heat treatment on Cr and Fe-rich precipitates in thermally aged duplex steels | Emerging Materials Research | 2018-19 | 8 | 307-314 | https://doi.org/10.1680/jemmr.18.00004 | |
| 263 | Shamanth V | EFFECT OF HEAT TREATMENT ON THE MICROSTRUCTURE OF DUPLEX STAINLESS STEELS | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 57-66 | 2249-8001 | |
| 264 | Shamanth V | Design and Development of Piezoelectric Tile Prototype for Energy Harvesting from Footsteps | Journal of Emerging Technologies and Innovative Research | 2018-19 | Special Issue 4 | 298-305 | 2349-5162 | |
| 265 | Rajesh K.R. | Design and Fabrication of Acoustic Fire Extinguisher | Journal of Emerging Technologies and Innovative Research | 2018-19 | 8 | 259-270 | 2349-5162 | |
| 266 | Deepak .S.A | "RESPONSE OF SIMPLY SUPPORTED FGM PLATES SUBJECTED TO STATIC LOADING USING ANSYS" | International Journal of Emerging Technologies and Innovative Research | 2018-19 | 3 | 153-159 | 2349-5162 | |
| 267 | Anand Babu K | Design and Fabrication of Magnetic Generator Using Neodymium Magnets | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 011-018 | 2349-5162 | |
| 268 | Somesha G H | Design and Analysis of Hybrid Segway Vehicle" | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 458-461 | 2349-5162 | |
| 269 | Jagadeesh Babu S M | An evidence of pseudo-elasticity in a caliber rolled Ti-6Al-4V alloy and its effect on tension-compression flow asymmetry | Materials Science and Engineering: A | 2018-19 | 5 | 24-27 | https://doi.org/10.1016/j.msea.2019.03.123 | 5.87 |
| 270 | Jagadeesh Babu S M | Effects of temporary alloying and severe plastic deformation on microstructure evolution and mechanical properties in Ti-alloys: A comparative study | Transactions of the Indian Institute of Metals | 2018-19 | 5 | 635-639 | https://doi.org/10.1007/s12666-019-01594-3 | |
| 271 | Pramod S Kataraki | Development of foam porous media to undergo surface and submerged flame during premixed combustion | Materials Science and Engineering | 2018-19 | 5 | 53-60 | doi:10.1088/1757-899X/505/1/012123 | 1.43 |
| 272 | Pramodkumar S Kataraki | Design and Development of Bluetooth Operated Machine for Lifting, Cleaning and Painting Operations | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 589-597 | 2349-5162 | |
| 273 | Pramodkumar S Kataraki | A Generative Computer-Aided Process Planning for Mill Parts by Firefly Approach | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 650-658 | 2349-5162 | |
| 274 | Manjunatha G | EXPERIMENTAL INVESTIGATION AND COMPARISON OF DIFFERENT METAL TUBES FOR ENERGY ABSORPTION | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 2 | 1421-1425 | 2249-8001 | |
| 275 | Pavan D | Conceptual Design of Automated Wall Painting Machine | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 2 | 1-009 | 2249-8001 | |
| 276 | Pavan D | Free Vibration Analysis of Functionally Graded Materials Using ANSYS | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 447-480 | 2349-5162 | |
| 277 | Pavan D | Design and Fabrication of Treadle Pump | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 523-526 | 2349-5162 | |
| 278 | Karthik S | Design of Multi-Side Pneumatic Trailer for Logistic Purpose | International Journal for Science and Advance Research In Technology (IJSART) | 2018-19 | 8 | 381-384 | 2395-1052 | |
| 279 | Karthik S | BLUETOOTH CONTROLLED SOLAR POWERED MULTIPURPOSE AGRICULTURE MACHINE | International Journal of Emerging Technologies and Innovative Research (www.jetir.org) | 2018-19 | 8 | 562-567 | 2349-5162 | |
| 280 | Karthik S | DESIGN AND ANALYSIS OF STABLE PLATFORM FOR SATELLITE OPTICAL PAYLOAD | International Journal of Emerging Technologies and Innovative Research (www.jetir.org) | 2018-19 | 6 | 29-33 | 2349-5162 | |
| 281 | Madhu B P | Design and Fabrication of CNC Pyrography | International Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 32-35 | 2349-5162 | |
| 282 | Madhu B P | Variable Positioning Smart Coupling | International Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 33-36 | 2349-5162 | |
| 283 | Madhu B P | Numerical Simulation of Convergent-Divergent nozzle and Design, Simulation analysis of Contour Nozzle for different divergent angle | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 28-32 | 2249-8001 | |
| 284 | Anand S N | IMPLEMENTATION OF STAGING AUTOMATION SYSTEM FOR METAL INJECTION MOLDED PARTS | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 6 | 283-288 | 2349-5162 | |
| 285 | Anand S N | REAL TIME MONITORING SYSTEM FOR INDUCTION HARDENING MACHINE | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 545-552 | 2349-5162 | |
| 286 | Anand S N | STEADY STATE THERMAL ANALYSIS OF AN INDUCTION COIL USED FOR INDUCTION HARDENING | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 130-135 | 2349-5162 | |
| 287 | Manjunath S H | SYNTHESIS AND CHARACTERIZATION OF AL 6061 REINFORCED WITH 2% GRAPHITE, 2% BORON HYBRID MMCS USING STIR AND CENTRIFUGAL CASTING TECHNIQUE | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 394-401 | 2249-8001 | |
| 288 | N. Jegadeeswaran | A REVIEW ON MECHANICAL PROPERTIES OF E-GLASS, MICA AND FLY ASH REINFORCED ALUMINIUM (AL6061) COMPOSITES | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 143-149 | 2249-8001 | |
| 289 | Arunkumar H | MICROWAVE ASSISTED EXTRACTION AND TRANSESTERIFICATION OF BIOFUELS - A COMPREHENSIVE REVIEW | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 156-160 | 2249-8001 | |
| 290 | N. Jegadeeswaran | Fabrication of Hydraulic Press Machine | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 347-353 | 2349-5162 | |
| 291 | N. Jegadeeswaran | CHARACTERIZATION OF ALUMINIUM REINFORCED WITH SILICON CARBIDE AND GRAPHENE METAL MATRIX COMPOSITES | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 113-124 | 2349-5162 | |
| 292 | Sunil S | Steering Controlled Headlights using Limit Switch with Automatic Dim and Dip Mechanism | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 573-582 | 2349-5162 | |
| 293 | Nithin H S | EVALUATION OF MECHANICAL PROPERTIES OF FLY ASH BASED POLYMER MATRIX COMPOSITE | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 8 | 131-138 | 2349-5162 | |
| 294 | Nithin H S | EVALUATION OF TRIBOLOGICAL PROPERTIES OF ALUMINIUM METAL MATRIX COMPOSITE | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 598-601 | 2349-5162 | |
| 295 | Anand S N | Wireless Remote Controlled Grass Trimmer | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 569-573 | 2395-1052 | |
| 296 | Robinson P | Design and Fabrication of Multi-purpose Agricultural Vehicle | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 36-41 | 2395-1052 | |
| 297 | Santhosh B D | Design and Fabrication of Harvester and Chopper for onsite Fodder Collection | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 5 | 410-417 | 2395-1052 | |
| 298 | Rajesh K R | Modeling and fabrication of acoustic fire extinguisher. | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 418-425 | 2349-5162 | |
| 299 | Richa Tripathi | Design and development of Automatic lawn mover | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 1628-1631 | 2349-5162 | |
| 300 | Manjunath G | FABRICATION OF PNEUMATIC CAN CRUSHER | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 430-433 | 2349-5162 | |
| 301 | Manjunath G | Design and fabrication of automatic material handling transporter | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 563-566 | 2349-5162 | |
| 302 | Shanwaz Patil | Alignment of engine gearbox using laser system in LC helicopter | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 24-27 | 2349-5162 | |
| 303 | Shanawaz Patil | Fabrication of solar powered water purification | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 136-142 | 2349-5162 | |
| 304 | Shanwazpatil | Effect of hot rolling on mechanical properties of aluminium metal matrix composites. | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | (5-10) | 2349-5162 | |
| 305 | Praveen Math | Solar powered evaporative cooling system storage | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 215-217 | 2349-5162 | |
| 306 | Praveen Math | Performance evaluation of refrigeration system using LPG | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 627-634 | 2349-5162 | |
| 307 | Manjunath L H | Characterization and Plastic Deformation of Aluminium Multi-Walled Carbon Nanotube Metal Matrix Composite | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 494-499 | 2349-5162 | |
| 308 | Manjunath L H | MECHANICAL PROPERTIESOF UHMWPE WOVEN FABRIC/EPOXY COMPOSITES | International Journal of Mechanical Engineering and Technology (IJMET) | 2018-19 | 6 | 489-493 | 0976-6359 | |
| 309 | Manjunath C | Power Generation by Designing and Fabrication of Maglev Wind Turbine | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 659-666 | 2349-5162 | |
| 310 | Manjunath .C | Design and Fabrication of Solar based Bluetooth Controlled Pesticide Sprayer |
Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 560-568 | 2349-5162 | |
| 311 | Avinash.S | Design and Development of Portable Corn Huller | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 553-559 | 2349-5162 | |
| 312 | Deepak .S.A | An experimental Study of Single basin double slope solar still. | Journal of Emerging Technologies and Innovative Research | 2018-19 | 12 | 1070-1077 | 2349-5162 | |
| 313 | Varadaraj K R | Industrial pipe inspection robot with rust removal | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | (11-18) | 2349-5162 | |
| 314 | Shanwaz Patil | The characterization and Mechanical properties of Al7075 | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 6 | 574-579 | 2249-8001 | |
| 315 | Jagadeesh Babu S M | Phase transformation and microstructure evolution study in various alloy systems: An insight | IOP Conf. Series: Materials Science and Engineering | 2018-19 | 6 | 257-262 | doi:10.1088/1757-899X/505/1/012149 | 10.2746 |
| 316 | N. Jegadeeswaran | Characterization of Si-C composites. | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 168-173 | 2349-5162 | |
| 317 | Sachin kumar patil | Friction stir welding of AMC’s | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 269-275 | 2349-5162 | |
| 318 | Sachin kumar Patil | Studies on Optimization of Friction Stir Welding Process Parameters | Journal of Emerging Technologies and Innovative Research | 2018-19 | 8 | 1-10 | 2349-5162 | |
| 319 | Kalyana Kumar M | To Study the Characteristics of Aluminum 6061 Material Using Zirconium Dioxide As Coating Material | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 43983 | 2349-5162 | |
| 320 | Kalyana Kumar M | STUDY ON CHARACTERISTICS OF ZIRCONIUM OXIDE ON ALUMINUM BASED PISTON USING PLASMA COATING | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 6 | 569-573 | 2249-8001 | |
| 321 | Sharan Teja Reddy | Fabrication of Multi-purpose Agricultural Hybrid Machine | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 433-438 | 2349-5162 | |
| 322 | Varun Kumar Reddy | Design and fabrication of system to lift water by hydraulic energy | IJSART | 2018-19 | 6 | 396-403 | 2395-1052 | |
| 323 | Ramesh Kumar S C | Numerical and Experimental Analysis of Aerofoil for electric -Manned Air Vehicle (e-MAV) | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 243-248 | 2349-5162 | |
| 324 | Ramesh Kumar S C | Mechanical Properties of Hybrid Nano Composites | Journal of Emerging Technologies and Innovative Research | 2018-19 | 8 | 103-112 | 2349-5162 | |
| 325 | Ramesh Kumar S C | Fabrication of Hydraulics trolley for material handling | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 193-196 | 2349-5162 | |
| 326 | Dasharath S M | Corrosion and Tribological behavior of ultra /Nano Grained Aluminium alloy processed by cryo deformation | Journal of Emerging Technologies and Innovative Research | 2018-19 | 7 | 570-572 | 2349-5162 | |
| 327 | Dasharath S M | Mechanical properties of ultrafine grains bulk copper alloy by cryorolling | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 289-296 | 2349-5162 | |
| 328 | Dasharath S M | EFFECT OF ANNEALING ON MECHANICAL BEHAVIOR Of cryorolled low SFE Cu Based Alloy | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2018-19 | 6 | 263-268 | 2249-8001 | |
| 329 | Shivasharanyya swamy | Process Improvement in R-Armature Line | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 174-179 | 2349-5162 | |
| 330 | Shivasharanyya swamy | Prediction of Temperature Measurement Methods during Rotary Drilling Operations -A Review | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 121-129 | 2349-5162 | |
| 331 | Arunkumar H | Experimental Investigation on the Performance and Emission Characteristics of Waste Cooking oil Bio diesel in DI Diesel Engine | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 404-409 | 2349-5162 | |
| 332 | Sachin prabha | STUDY AND CHARACTERIZATION OF ALUMINIUM 7075 HYBRID COMPOSITE MATERIALS | Journal of Emerging Technologies and Innovative Research | 2018-19 | 8 | 993-1000 | 2349-5162 | |
| 333 | Shreyas P S | Design and Fabrication of Automatic Seed Sowing Machine | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 444-449 | 2349-5162 | |
| 334 | Lakshmi Narayana K S | Investigation on influence of different tool pin geometry on mechanical properties of weld joints | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 539-543 | 2349-5162 | |
| 335 | Srinivas s | Design of Pneumatic Punching Machine |
Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 180-186 | 2349-5162 | |
| 336 | Srinivas s | Design and fabrication of automatic gear changing system using electro magnetic valves | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 360-364 | 2349-5162 | |
| 337 | Sharath G S | Fault diagnosis in spur gear box using acoustic emission | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 42-45 | 2349-5162 | |
| 338 | Sharath G S | Design, develop and fault diagnosis of spur gear box using artificial neural network | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 645-653 | 2349-5162 | |
| 339 | Kumaraswamy. K. L | A STUDY ON DESIGN AND CONSTRUCTION OF AN EVAPORATIVE COOLING SYSTEM FOR THE STORAGE OF FRESH VEGETABLES | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 508-515 | 2249-8001 | |
| 340 | Venkatesha B K | Preparation and Property Evaluation of Bamboo/ E-Glass Fiber Reinforced Polymer Composites | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 377-384 | 2349-5162 | |
| 341 | Vijee Kumar | Effect of ball milling on mechanical and tribological properties of carbon nano tubes and graphene reinforced with aluminum composites | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 640-644 | 2349-5162 | |
| 342 | Vijee Kumar | Fabrication and evaluation of mechanical properties of Aluminium hybrid nano MMC’s | Journal of Emerging Technologies and Innovative Research | 2018-19 | 6 | 450-457 | 2349-5162 | |
| 343 | Naveen krishna C | Study on Mechanical properties and corrosion Behaviour of Bio-Polymer Metal Matrix Composite | Journal of Emerging Technologies and Innovative Research | 2018-19 | 8 | 139-148 | 2349-5162 | |
| 344 | Gururaja Sharma T | Study of Coating on Ceramic Metal Substrate | Journal of Emerging Technologies and Innovative Research | 2018-19 | 5 | 602-606 | 2349-5162 | |
| 345 | Anand S N | Development and Application of FBBFBEM Solution for 3-D Complex- Shaped Domain | Materials Today: Proceedings | 2018-19 | 5 | 527-534 | https://doi.org/10.1016/j.matpr.2017.11.090 | 0.7 |
| 346 | Manjunath S H | Corrosion effects of simarouuba Glauca Biodiesel on compression | International Journal of Recent Technology and Engineering | 2018-19 | 5 | 365-370 | 2249-8001 | 1.24 |
| 347 | Sharanappa Godiganur | Influence of Nanoparticles on the performance and emission charecteristics of Diesel engine Fuelled with Chicken Biodiesel” | International Journal of Recent Technology and Engineering | 2019-20 | 5 | 2825-2829 | 2277-3878 | |
| 348 | Manjunath L H | Physical and Wear Properties of UHMWPE Fabric Reinforced Epoxy Composites | International Journal of Recent Technology and Engineering | 2019-20 | 1 | 7577-7586 | https://doi.org/10.15282/ijame.17.1.2020.07.0562 | 0.107 |
| 349 | Raju B S | Studies on the effect of welding parameters for friction stir welded AA6082 reinforced with Aluminium Oxide | Materials Today Proceedings | 2019-20 | 2 | 108-119 | https://doi.org/10.1016/j.matpr.2019.10.059 | |
| 350 | Raju B S | Fabrication & characterization of ZnS micro particulate filled glass and jute fibre reinforced hybrid polymer composites | Materials Today Proceedings | 2019-20 | 2 | 125-133 | https://doi.org/10.1016/j.matpr.2019.10.061 | 0.7 |
| 351 | Jegadeeswaran | Corrosion resistance by HVOF coating on gas turbine materials of cobalt based superalloy | Materails Today Proceedings | 2019-20 | 2 | 173-176 | https://doi.org/10.1016/j.matpr.2019.10.102 | 1.24 |
| 352 | Somasundaram B | Wear behavior of HVOF sprayed WC-Co/NiCrAlYSi (35-65%) and WC-Co/NiCrAlYSi (80-20%) coatings on turbine SS316 steel | Materails Today Proceedings | 2019-20 | 2 | 103-107 | https://doi.org/10.1016/j.matpr.2019.10.048 | 1.24 |
| 353 | N Naga Suresh Babu | Application of LED (Lean Embedded D3) Methodology to Improve Quality of Starter Motor EGT- Assembly | International Journal of Recent Technology and Engineering | 2019-20 | 5 | 10004-10007 | 2277-3878 | 1.24 |
| 354 | S. Devaraj | Processing, microstructure and mechanical behavior of spraycasted Al-4.5 wt% Cu alloy | Materails Today Proceedings | 2019-20 | Special issue Part-2 | 120-124 | https://doi.org/10.1016/j.matpr.2019.10.060 | 1.24 |
| 355 | Hampali | Investigation of mechanical properties of polymer composites used for orthopedic application | Materails Today Proceedings | 2019-20 | Special issue Part-2 | 213-216 | https://doi.org/10.1016/j.matpr.2019.11.056 | 0.107 |
| 356 | Hemanth K | High-Temperature Oxidation and Corrosion Behaviour of APS CoCrAlY + Cr3C2-NiCr Composite Coating | Journal of Bio-and Tribo-Corrosion | 2019-20 | 6 | 28 | https://doi.org/10.1007/s40735-020-0322-9 | 1.24 |
| 357 | Niranjan Hiremath | Static and Modal Analysis of Diaphragm Spring used in Depth Sensing Indenting Machine | Materails Today Proceedings | 2019-20 | Special issue Part-2 | 161-166 | https://doi.org/10.1016/j.matpr.2019.10.098 | 1.24 |
| 358 | Niranjan Hiremath | Mechanical Characterization of the Coated Roller Bearings | International Research Journal of Engineering and Technology | 2019-20 | 10 | 431-433 | 2395-0056 | 3.115 |
| 359 | Balaji.S | Influence of Propyl gallate antioxidant on performance and emissions of a compression ignition engine fueled with Madhuca Indica B20 ester blends | Energy Sources, Part A: Recovery, Utilization, and Environmental Effects | 2019-20 | 2 | 01 to 13 | https://doi.org/10.1080/15567036.2019.1644396 | 1.24 |
| 360 | Sachinkumar | Studies on microstructure and mechanical characteristics of as cast AA6061/SiC/fly ash hybrid AMCs produced by stir casting | Materials Today proceedings | 2019-20 | Special issue Part-2 | 1-5 | https://doi.org/10.1016/j.matpr.2020.01.266 | 0.7 |
| 361 | Ramesh Kumar S C | Experimental study on dynamic behaviour of hybrid nano composites reinforced with kenaf/banana/glass fiber | International Journal of Recent Technology and Engineering | 2019-20 | 10 | 421-25 | 2395-0056 | 0.266 |
| 362 | Ashwini M V | “Design of Automatic Organic Waste Shredder for Composting” | International Journal of Recent Technology and Engineering | 2019-20 | 5 | 899-902 | 2277-3878 | |
| 363 | Shanawaz Patil | A Statistical analysis of optimization of wear behavior of Al7075-Beryl-Graphene hybrid composites using Taguchi technique | Materials Today proceedings | 2019-20 | Special issue Part-2 | 195-201 | https://doi.org/10.1016/j.matpr.2019.11.027 | 0.7 |
| 364 | Shanawaz Patil | Microstructure, Tensile and Hardness properties of Al7075 Matrix Composites Reinforced with Graphene Nanoplatelets and Beryl Fabricated by Stir Casting Method | International Journal of Engineering and Advanced Technology | 2019-20 | 1 | 6761-6765 | 2249-8958 | 0.107 |
| 365 | Shanawaz Patil | Tribological Behavior and Hardness Properties of Heat Treated Al7075-Beryl-Graphene Hybrid Metal Matrix Composites | International Journal of Recent Technology and Engineering | 2019-20 | 3 | 4808-4815 | 2277-3878 | 1.24 |
| 366 | Shanawaz Patil | Effect Of Heat Treatment On Mechanical Properties And Wear Behavior Of Al7075 Alloy Reinforced With Beryl And Graphene Hybrid Metal Matrix Composites | International Journal of Aerospace and Mechanical Engineering | 2019-20 | 6 | 399-406 | 91950263 | |
| 367 | Shanawaz Patil | Investigation on Mechanical Properties of Hybrid Graphene and Beryl reinforced aluminum 7075 composites | IOP Conference Series: Materials Science and Engineering | 2019-20 | 01-Oct | doi:10.1088/1757-899X/577/1/012112 | 0.107 | |
| 368 | Shanawaz Patil | Effect of Beryl addition on mechanical properties of Al7075 using a stir casting technique | International Journal of Innovative Technology and Exploring Engineering | 2019-20 | 1 | 3298-3303 | 2278-3075 | |
| 369 | Sharan Teja Reddy | Effect of carbon black nano-fillers on tribological properties of Al6061-Aluminium metal matrix composites | Materials Today proceedings | 2019-20 | Special issue Part-2 | 202-207 | https://doi.org/10.1016/j.matpr.2019.11.045 | 0.51 |
| 370 | Sharan Teja Reddy | Development and study on corrosion properties of Al6061/Nanocarbon black reinforced aluminium metal matrix composites | Materials Today proceedings | 2019-20 | Special issue Part-2 | 185-190 | https://doi.org/10.1016/j.matpr.2019.10.172 | |
| 371 | K S Narayanaswamy | Experimental Determination of Viscosity of Water-Glycerine based Cu nano-fluids | Material Today Proceedings | 2019-20 | 2 | 517-520 | DOI: 10.1016/j.matpr.2019.07.646 | 0.7 |
| 372 | Channabasav | Numerical Analysis of Turbulent Flow over a 2-D Prolate Spheroid | International Journal of Recent Technology and Engineering | 2019-20 | 4 | 4646-4651 | 2277-3878 | |
| 373 | Pradip Gunaki | Friction Stir Welding of Dissimilar Alloys of Titanium & Aluminum: A Review | International Research Journal of Engineering and Technology | 2019-20 | 10 | 533-537 | 2395-0056 | |
| 374 | Karthik S | Design and Fabrication of A Model For Extracting Cattle Waste Pellets By Extrusion Method | nternational Journal for Science and Advance Research in Technology | 2019-20 | 10 | 98-102 | 2395-1052 | 0.107 |
| 375 | Srinivas s | Mechanical Characterisation of the Coated Roller Bearing | International Journal of Recent Technology and Engineering | 2019-20 | 4 | 10943-10945 | 2277-3878 | |
| 376 | Madhu B P | Numerical Analysis of Butterfly Valve for Industrial Application | International Research Journal of Engineering and Technology (IRJET) | 2019-20 | 10 | 400-404 | 2395-0056 | |
| 377 | Kalyana Kumar M | Thermo-Mechanical Properties and Corrosion Analysis of Coated and Uncoated Piston used in CI Engines | International Research Journal of Engineering and Technology (IRJET) | 2019-20 | 10 | 426-430 | 2395-0056 | 0.107 |
| 378 | Sachin Prabha | STUDY AND CHARACTERIZATION OF ALUMINIUM 7075 HYBRID COMPOSITES REINFORCED WITH B4C AND Wc | International Research Journal of Engineering and Technology | 2019-20 | 10 | 392-396 | 2395-0056 | |
| 379 | Praveen Math | Characterisation of Mechanical Properties on Magnesium Hybrid Composites for Bio-Medical Applications | International Journal of Recent Technology and Engineering (IJRTE) | 2019-20 | 4 | 12168-12172 | 2277-3878 | |
| 380 | Praveen Math | A STUDY ON PERFORMANCE ANALYSIS AND DESIGN OPTIMIZATION OF SHELL AND TUBE HEAT EXCHANGERS | Journal of Xi'an University of Architecture & Technology | 2019-20 | 5 | 2509-2517 | 1006-7930 | |
| 381 | Praveen Math | A Study on Experimental And CFD Simulation of Performance Analysis of Primary Air Duct | Journal of Xi'an University of Architecture & Technology | 2019-20 | 4 | 2568-2575 | 1006-7930 | 0.107 |
| 382 | Praveen Math | Characterisation of Mechanical Properties on Magnesium Hybrid Composites for Bio-Medical Applications | International Journal of Recent Technology and Engineering | 2019-20 | 4 | 12168-12172 | https://doi.org/10.36297/vw.applsci.v1i1.14 | |
| 383 | Kumaraswamy. K. L | Fluid Flow Measuring Devices used in An Inertial Measurement Unit Based on Different Flow Measurement Sensors. | International Journal of Recent Technology and Engineering | 2019-20 | 5 | 555-558 | 2277-3878 | |
| 384 | Varun Kumar Reddy | Performance, Combustion and Emission Characteristics of Direct Injection Diesel Engine Fueled With Castor Oil Methyl Esters and Ethanol Blends Equipped With 6 Hole Nozzle | International Journal of Recent Technology and Engineering | 2019-20 | 3 | 5527-5530 | 2277-3878 | 0.107 |
| 385 | Dasharath S M | Effect of Zr on nanocrystalline Al-4.5 wt.% Cu alloy and its strengthening mechanisms prepared by mechanical alloying | Materails Today Proceedings | 2019-20 | Special issue Part-2 | 140-144 | https://doi.org/10.1016/j.matpr.2019.10.086 | 0.107 |
| 386 | Dasharath S M | Microstructural and mechanical properties of magnesium alloy processed by severe plastic deformation (SPD) - A review | Materails Today Proceedings | 2019-20 | Special issue Part-2 | 145-154 | https://doi.org/10.1016/j.matpr.2019.10.088 | 0.107 |
| 387 | Dr. Shamanth V | Influence of ageing on kinetics and strain-hardening behaviour of duplex stainless steels | Emerging Materials Research | 2019-20 | 4 | 588-597 | https://doi.org/10.1680/jemmr.19.00095 | 1.24 |
| 388 | C Rajesh Babu | Design and Analysis of Solar Assisted Electrical Vehicle | International Journal of Recent Technology and Engineering | 2019-20 | 5 | 2830-2834 | 2277-3878 | 1.24 |
| 389 | Anand Babu K | Improved Erosion Resistance by HVOF Sprayed 10%Al2O3-COCrAlTaY Coating on Ti-31 | International Journal of Recent Technology and Engineering | 2019-20 | 5 | 1605-1610 | 2277-3878 | 0.64 |
| 390 | Somesha G H | Experimental Investigation of Enhancement of Convective Heat Transfer Coefficient in Circular Tube with Pin Fin Element | International Research Journal of Engineering and Technology | 2019-20 | 10 | 441-444 | 2395-0056 | 0.107 |
| 391 | Richa Tripathi | Thermal Analysis of Arduino Uno Microcontroller | International Journal of Recent Technology and Engineering (IJRTE) | 2019-20 | 4 | 4381-84 | 2395-0056 | 0.107 |
| 392 | Manjunath G K | Tensile Toughness Characteristics of Cast Al-Zn-Mg Alloys Processed by Equal Channel Angular Pressing | Materials Science Forum | 2019-20 | 4 | 161-166 | doi:10.4028/www.scientific.net/MSF.978.161 | 7.529 |
| 393 | Manjunath G K | Dry sliding wear behaviour of Al-5Zn-2Mg alloy processed by severe plastic deformation | Materials Today proceedings | 2019-20 | Special issue Part-2 | https://doi.org/10.1016/j.matpr.2020.01.480 | 0.107 | |
| 394 | Hanumantharaya R | Modelling and optimisation of adhesive bonded joint strength of composites for aerospace applications | International Journal of Computational Materials Science and Surface Engineering | 2019-20 | 3 | 167-184 | https://doi.org/10.1504/IJCMSSE.2019.104694 | |
| 395 | Mr.Hanumantharaya R | A comprehensive modelling, analysis and optimisation of adhesive bonded single lap glass fibre reinforced composite joints | International Journal of Materials Engineering Innovation | 2019-20 | 4 | 174-176 | https://doi.org/10.1504/IJMATEI.2019.103609 | 1.24 |
| 396 | Mr.Hanumantharaya R | Experimental analysis and prediction of strength of adhesive‑bonded single‑lap composite joints: Taguchi and artificial neural network approaches | Springer Nature Journal | 2019-20 | 2 | 142-145 | https://doi.org/10.1007/s42452-020-2851-8 | 1.24 |
| 397 | Anand S N | Face Based Basis Function Solutions to thermal conduction | Material Today Proceedings | 2019-20 | 2 | 167-172 | https://doi.org/10.1016/j.matpr.2019.10.100 | 1.24 |
| 398 | Shivasharanyya swamy | Mechanical and micro structural behaviour of AL-7075/B4C composite fabricated through stir casting | International Journal of Advance Research, Ideas and Innovations in Technology | 2019-20 | 11(6) | 2454-132X | ||
| 399 | C D Hampali | REVIEW PAPER OF SOLAR ELECTRIC TRICYCLE | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 2229-5518 | 1.24 | |
| 400 | Pramodkumar S Kataraki | DEVELOPMENT OF 3D MODEL FROM 2D IMAGE BY POINT CLOUD METHOD | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 5-9 | 2229-5518 | |
| 401 | Madhu B P | Numerical analysis of supersonic nozzle using method of Characteristic | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 9-14 | 2229-5518 | |
| 402 | Shivasharanayya S | Design and Analysis of Plate fin Heat Exchanger used in Radar Systems. | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 15-20 | 2229-5518 | |
| 403 | K S Narayanaswamy | Design and Development of Cylindrical Robot for Library Applications | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 145-159 | 2229-5518 | |
| 404 | Pradip Gunaki | Determination of Critical Spares and its Stocking Policy to Optimize Maintenance Costs | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 26-29 | 2229-5518 | |
| 405 | Pradip Gunaki | Design And Fabrication Of Self Weighing Truck With Free Rotation | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 30-33 | 2229-5518 | |
| 406 | Arunkumar H | Elimination of Leakages in Hand Primer | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 35-37 | 2229-5518 | |
| 407 | B Somasundar | High-temperature corrosion behaviour of plasma sprayed NiCr-Al2O3 Coating | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 110-115 | 2229-5518 | |
| 408 | L R Jagadeesh | DESIGN AND DEVELOPMENT OF GANTRY ROBOT FOR NURSERY SEED SOWING APPLICATION | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 43-46 | 2229-5518 | |
| 409 | Rajesh Babu C. | CFD ANALYSIS OF AN ECONOMIZER FOR HEAT TRANSFER ENHANCEMENT USING PASSIVE TECHNIQUE | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 47-52 | 2229-5518 | |
| 410 | Vijee Kumar | DESIGN AND DEVEVELOPMENT OF LOW COST PICK AND PLACE CARTESIAN ROBOT WITH USE OF SERVO GRIPPER | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 58-59 | 2229-5518 | |
| 411 | Manjunath. C | DESIGN & FABRICATION OF EXPERIMENTAL SET UP FOR VORTEX FLOW VISUALISATION | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 60-64 | 2229-5518 | |
| 412 | Pavan D | Design and fabrication of Delta Type 3D printer | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 65-72 | 2229-5518 | |
| 413 | Srinivas S | DESIGN AND FABRICATION OF CARTESIAN 3D PRINTER AT LOW COST | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 73-79 | 2229-5518 | |
| 414 | Venkatesha B K | Fabrication of Agricultural Robot for Ploughing, Seeding and Grass Cutting | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 80-87 | 2229-5518 | |
| 415 | Somesha G H | Comparative Study on Aluminum Coating Methods on Ti-6Al-4V - Review | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 88-95 | 2229-5518 | |
| 416 | Arunkumar H | Automated Paint Dosing Machine - A Comprehensive Review | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 96-98 | 2229-5518 | |
| 417 | Manjunath L.H | Design and Fabrication of Multi-Purpose Agriculture Vehicle | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 99-103 | 2229-5518 | |
| 418 | Praveen Math | DESIGN, CONSTRUCTION AND TESTING OF EVAPORATIVE COOLING FACILITY FOR STORING VEGETABLES AND FRUITS | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 104-107 | 2229-5518 | |
| 419 | Sharath G S | Incipient Fault Detection in Spur Gear Box | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 108-112 | 2229-5518 | |
| 420 | Ashwini M V | Effective Treatment and Utilization Of Food Waste & Degradable Waste To Produce Biogas | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 113-118 | 2229-5518 | |
| 421 | Shivasharanaya Swamy | Solar Tracking Autonomous Lawn Mower | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 119-122 | 2229-5518 | |
| 422 | Varun Kumar Reddy N | Air Filtration Technology-A Comprehensive Review | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 123-129 | 2229-5518 | |
| 423 | Mahesh L | Design and Development Of AI Based Quality Inspection Automation Based On Colour And Size | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 130-140 | 2229-5518 | |
| 424 | Rajesh Babu.C | NUMERICAL MODELING OF AN ECONOMIZER USING SERRATED AND ROUGH SURFACE FOR HEAT TRANSFER AUGMENTATION | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 140-144 | 2229-5518 | |
| 425 | Vinod R | Design and Development of Palletizing SCARA ROBOT for Food Processing industry | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 145-149 | 2229-5518 | |
| 426 | Manjunatha G | Design and Development of Articulate Robot for Machine Tending Applications | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 150-156 | 2229-5518 | |
| 427 | Karthik.S | Design and Development of CNC Based Laser Engraver | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 157-160 | 2229-5518 | |
| 428 | Karthik S | Thermal analysis of a rack mountable unit to study conjugate heat transfer using Solid Works | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 161-164 | 2229-5518 | |
| 429 | Hemanth K | EXTRACTION OF BETALAIN DYE FROM BEETROOT AND PREPARATION OF ORGANIC DSSC | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 165-168 | 2229-5518 | |
| 430 | Sharanappa Godiganur | Study on the Performance and Emission Characteristics of Diesel Engine with Blends Biodiesel with Diesel as Fuel | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 169-175 | 2229-5518 | |
| 431 | Ramesh Kumar S.C. | A Review on Automatic Tyre Inflation System | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 176-182 | 2229-5518 | |
| 432 | Dasharath S M | Development of Carbon Fibers Reinforced Silicon Carbide Matrix Ceramic Composite | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 183-192 | 2229-5518 | |
| 433 | Varadharaj K. R | AUTOMATED PLASTIC SHREDDING DUSTBIN | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 193-201 | 2229-5518 | |
| 434 | Srinivas S | DESIGN AND ANALYSIS OF LOADING BRACKET FOR LANDING GEAR OF AN AIRCRAFT | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 202-209 | 2229-5518 | |
| 435 | Dharamendara M | Simulation of Radome Moving at Supersonic Speed | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 210-212 | 2229-5518 | |
| 436 | Srinivas S | DESIGN AND ANALYSIS OF CYCLONE SEPARATOR | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 213-217 | 2229-5518 | |
| 437 | Niranjan Hiremath | Microalgae Oil as Bio-lubricant- A Review | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 218-222 | 2229-5518 | |
| 438 | Gururaja Sharma.T | ADVANCED SPYING AND BOMB DISPOSAL ROBOT | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 222-223 | 2229-5518 | |
| 439 | C Naveen Krishna . | Design and Fabrication of Pesticide Spray Machine using blue tooth technology | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 224-226 | 2229-5518 | |
| 440 | Dasharath S M | MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF NANO STRUCTURAL TITANIUM ALLOYS PROCESSED BY BALL MILLING | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 227-233 | 2229-5518 | |
| 441 | Rahul Kumar | DESIGN AND FABRICATION OF SOLAR POWER VACUUM CLEANER | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 234-237 | 2229-5518 | |
| 442 | Sachinkumar Patil | Friction Stir Welding of AMCs | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 238-243 | 2229-5518 | |
| 443 | Avinash S | Study on Mechanical Properties of AZ91 Magnesium Alloy | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 238-243 | 2229-5518 | |
| 444 | N Nagasuresh Babu | DESIGN AND FABRICATION OF PATIENT TRANSFERRING DEVICE | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 248-254 | 2229-5518 | |
| 445 | Balaji.S | Design and Fabrication of LPG Refrigeration System | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 255-263 | 2229-5518 | |
| 446 | Varun Kumar Reddy N | EXPERIMENTAL INVESTIGATION TO ENHANCE THE EFFICIENCY OF PHOTOVOLTAIC CELL | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 270-278 | 2229-5518 | |
| 447 | N Nagasuresh Babu | Value Stream Mapping in Conforma Clad Manufacturing Plant | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 268-273 | 2229-5518 | |
| 448 | Avinash S | Design and Fabrication of Automated Smart Solar grass cutter using GPS Technology | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 274-281 | 2229-5518 | |
| 449 | Vinod R | Establishing Error Proof Measurement System for Dimensional Check | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 274-277 | 2229-5518 | |
| 450 | Shanawaz Patil | Design and Development of Machine Vision Based Size Sorting Articulated Robot. | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 278-284 | 2229-5518 | |
| 451 | C.Naveen Krishna | DESIGN AND FABRICATION OF AGRI COPTER FOR SPRAYING PESTICIDES | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 290-296 | 2229-5518 | |
| 452 | Vinod R | Experimental study of Monofacial Solar Panel | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 292-295 | 2229-5518 | |
| 453 | Kumarswami K L | Design and Fabrication of Manually Operated Agro paddy Cutting Machine | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 296-300 | 2229-5518 | |
| 454 | Arun Kumar H | DESIGN AND FABRICATION OF BUBBLE BARRIER WITH | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 301-309 | 2229-5518 | |
| 455 | Praveen Math | CONVEYOR | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 310-317 | 2229-5518 | |
| 456 | Raju B S | DESIGN & DEVELOPMENT OF MIDDLE BLOCK ASSEMBLY JIG FOR MRS-1 PROJECT. | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 314-321 | 2229-5518 | |
| 457 | Gururaja Sharma T | Design and Fabrication of a Customized Tool for Gearbox Casing | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 322-330 | 2229-5518 | |
| 458 | Sharanappa Godiganur | DESIGN AND PERFOMANCE ANALYSIS OF BIO MASS GASSIFIER | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 331-336 | 2229-5518 | |
| 459 | Ramesh Kumar S.C. | DESIGN AND ANALYSIS OF ENGINE VALVE SPRING | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 338-342 | 2229-5518 | |
| 460 | Kalyan Kumar M | Solar operated hydraulic water pumping system using GSM | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 350-361 | 2229-5518 | |
| 461 | Raju B S | Inventory Load Carrying Mapped Rover | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 367-381 | 2229-5518 | |
| 462 | Raju B S | Design and Fabrication of Sustainable Dishwasher | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 381-386 | 2229-5518 | |
| 463 | Vijee Kumar | Application of Lean Manufacturing on Reduction of Down Time in Manufacturing Process Of Rocker Arm | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 390-397 | 2229-5518 | |
| 464 | Shreyas P S | Design and Fabrication of Frictionless Braking System | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 355-362 | 2229-5518 | |
| 465 | Suresha .S | ELECTRICALLY RUN AGRICULTURE SPRAYER VEHICLE | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 363-375 | 2229-5518 | |
| 466 | Sharan Teja Reddy K | SYNTHESIS AND CHARACTERIZATION OF ALUMINUM MMC’S | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 376-381 | 2229-5518 | |
| 467 | Jegadeeswaran N | DESIGN AND DEVELOPMENT OF FLOOD RELIEF HEXACOPTER | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 382-386 | 2229-5518 | |
| 468 | Shamanth V | Study on Influence of Scanning Speed on Mechanical Properties of AlSi10Mg Produced by Selective Laser Melting | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 387-392 | 2229-5518 | |
| 469 | Mahesh L | OPTIMIZATION OF ASSEMBLY PROCESS FOR HAND PRIMER | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 393-398 | 2229-5518 | |
| 470 | K.S.Narayanaswamy | LEAN MANUFACTURING: ANALYSIS OF VSM, OEE AND IMPLEMENTATION OF 5S | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 399-405 | 2229-5518 | |
| 471 | Deepak S A | STATIC AND DYNAMIC ANALYSIS OF FUNCTIONALLY GRADED MATERIALS | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 406-409 | 2229-5518 | |
| 472 | Jagadeesh Babu S M | Effect of Thermal Treatment on Microstructure Evolution and Mechanical Properties of CP-Ti and Ti-6Al-4V alloys | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 410-412 | 2229-5518 | |
| 473 | C D Hampali, | Extraction of Cutting Oil by Centrifugal Machine | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 413-416 | 2229-5518 | |
| 474 | Sharath GS | Design and Development of Machine Vision Based Colour Sorting Gantry Robot | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 417-421 | 2229-5518 | |
| 475 | Jegadeeswaran N | Development of Thermal Coatings on Turbine Blades to Resist the Corrosion | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 422-424 | 2229-5518 | |
| 476 | Praveen Math | Design and Fabrication of Power Generation unit From Railway Track | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 425-428 | 2229-5518 | |
| 477 | L.R. Jagadeesh | Design of Hydraulic Fixture for Machining of Automobile Component | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 429-432 | 2229-5518 | |
| 478 | Madhu B P | Theoretical, Numerical Prediction Of Viscous Coefficient Of Venturi Meter Under Non Iso Standard Conditions | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 433-436 | 2229-5518 | |
| 479 | Richa Tripathi | Design and Fabrication of Mulch Paper Laying Machine | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 437-441 | 2229-5518 | |
| 480 | Arun Kumar H | Optimum Allocation of Machine for Least Manufacturing Cost | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 442-445 | 2229-5518 | |
| 481 | Pavan D | FABRICATION OF BIO COMPOSITE PIPES USING BAMBOO FIBRE | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 446-449 | 2229-5518 | |
| 482 | Manjunath G K | Evolution of Mechanical Properties of Al-Zn-Mg Alloy Processed by Equal Channel Angular Pressing | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 450-453 | 2229-5518 | |
| 483 | Balaji.S | Design and Fabrication of Self Balancing Bike | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 454-458 | 2229-5518 | |
| 484 | Nagaraj Y | Application of Lean Manufacturing system in cutting/ Slitting machine | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 462-471 | 2229-5518 | |
| 485 | Varadaraj K.R | A Review on Design and Development of Capsule Vehicle | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 472-476 | 2229-5518 | |
| 486 | Madhu B P | SECONDARY OPERATION ON FUSION DEPOSIT MODELING | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 477-485 | 2229-5518 | |
| 487 | Sharan Teja Reddy K | Process Optimization in CNC Turning using Grey Relational Analysis | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 486-489 | 2229-5518 | |
| 488 | Sachin Prabha | The effect of different reinforcements on AA7075: A review | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 490-496 | 2229-5518 | |
| 489 | Anand Babu | Design and Fabrication of System to Convert Waste plastic into Crude oil | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 497-504 | 2229-5518 | |
| 490 | Somesh G.H | Design and Development of Mini CNC Machine for Small and Medium Scale Industries. | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 505-510 | 2229-5518 | |
| 491 | Lakshmi Narayan K S | Investigation of Mechanical Properties and Wear Behavior of Al 2024 Matrix Reinforced with Si3N4 and Graphene | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 511-516 | 2229-5518 | |
| 492 | Deepak S A | EXPERIMENTAL MEASUREMENT OF VIBRATION OF LIQUID DROPLETS | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 517-521 | 2229-5518 | |
| 493 | Kumarswamy K L | DESIGN AND IMPLEMENTATION OF AUTOMATED PACKING SYSTEM APMC YARD USING DELTA ROBOT | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 522-529 | 2229-5518 | |
| 494 | Kalyana Kumar M | Solar Powered Smart Bottle | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 530-537 | 2229-5518 | |
| 495 | B Somasundar | LEAD TIME REDUCTION IN PLANNING & PROCUREMENT | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 538-541 | 2229-5518 | |
| 496 | Dharamendra M. | Mono Wheel Electric Vehicle | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 542-545 | 2229-5518 | |
| 497 | Shanawaz Patil | Solar Powewred Waste Compacting Bin | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 546-549 | 2229-5518 | |
| 498 | Shamanth V | Studies on hardness and tensile testing of AlSi10Mg produced by Selective Laser Melting | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 550-554 | 2229-5518 | |
| 499 | Shivasharanayya Swamy | Design of Cardiopulmonary resuscitation Machine | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 555-560 | 2229-5518 | |
| 500 | Shreyas P S | Multi Axis Solar Tracking system | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 561-567 | 2229-5518 | |
| 501 | Venkatesh B K | Managing Operations to Obtain OEE Target through SAP Data by Reducing Machine Downtime | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 568-572 | 2229-5518 | |
| 502 | Rajesh K R | Review of Aluminium Alloy through Powder Route | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 573-576 | 2229-5518 | |
| 503 | Hanumanthraya | FABRICATION OF WATER TANK CLEANING MACHINE | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 577-581 | 2229-5518 | |
| 504 | Veerbhadrappa Telgane | Performance and emission study of a CI engine fuelled with biodiesel blended with kerosene | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 582-589 | 2229-5518 | |
| 505 | Devaraj S | Design and Development of Spray Atomization Process for Atomization of Light Structural Alloys | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 590-596 | 2229-5518 | |
| 506 | Robinson.P | Design and Fabrication of Automatic Channel Cleaner | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 597-599 | 2229-5518 | |
| 507 | Shamanth V | STUDY ON EFFECT OF HEAT TREATMENT ON THE MICROSTRUCTRUAL EVOLUATION & MECHANICAL PROPERTIES OF S2205 (DUPLEX STAINLESS STEEL) | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 600-604 | 2229-5518 | |
| 508 | Devaraj S | Studies on Al 4.5 wt.%Cu Alloy Processed Through Die Casting Process | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 605-614 | 2229-5518 | |
| 509 | Rajesh K R | Design and Analysis of Hat-Stiffened Conical Shell for Axial Compression | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 615-621 | 2229-5518 | |
| 510 | Kathik S | Design and Analysis of CFRP Boom for Supporting TTC antenna | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 622-628 | 2229-5518 | |
| 511 | Pavan D | CFD Analysis and Optimization of Pin Fin Heat Sink | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 629-637 | 2229-5518 | |
| 512 | Shivasharanayya Swamy | DESIGN & DYNAMIC ANALYSIS OF AERO TURBINE DISC | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 635-639 | 2229-5518 | |
| 513 | L.H Manjunatha | Studies on Loss of Preload in the Fastener Joint during Vibration | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 640-644 | 2229-5518 | |
| 514 | Niranjan Hiremath | Structural and Thermal Analysis of Drum Brake | International Journal of Scientific & Engineering Research | 2019-20 | 11(6) | 645-649 | 2229-5518 | |
| 515 | S. Devaraj | Effect of Macroalloying Element Addition of Aluminum on Pure Copper | Metallography, Microstructure, and Analysis | 2021 | 10 (1) | 36-45 | 21929262, 21929270 | 1.27 |
| 516 | S. Devaraj | Free vibration and moisture absorption behavior of sida acuta fibre polymer composite | Emerging Materials Research | 2021 | 10 (1) | 47-57 | 20460155, 20460147 | 0.64 |
| 517 | S. Devaraj | Microstructural and Mechanical Characterizationof Spark-Plasma-Sintered Compact of Al-4.5 wt.% CuAlloy Powder | Journal of Materials Engineering and Performance | 2021 | 30(1) | 2433-2438 | 1059-9495, 1544-1024 | 1.819 |
| 518 | S. Devaraj | A review on influence of nano-fluid MQL in machining processes | AIP Conference Proceedings | 2021 | 2317 | 20011 | 0094243X, 15517616 | 0.4 |
| 519 | S. Devaraj | A review on effect of processing parameters on mechanical properties of MMCs by friction stir process | AIP Conference Proceedings | 2021 | 2317 | 20040 | 0094243X, 15517616 | 0.4 |
| 520 | Hemanth K. | Study the dynamic behaviour of seven DOF of full car model with semi-active suspension system | International Journal of Vehicle Performance | 2021 | 7(1) | 21-40 | 17453194 | 0.88 |
| 521 | Hemanth K. | Performance analysis of MR damperbased semi-active suspension systemusing optimally tuned controllers | Proc IMechE Part D:J Automobile Engineering | 2021 | 235 | 001-14 | 9544070 | 0.645 |
| 522 | Sachinkumar Patil | Analysis of the Effect of Friction Stir Welding Parameters on Characteristics of AA6061 Composites using Response Surface Methodology | Transactions of the Indian Institute of Metals (TIIM) | 2021 | 74 | 1303-1319 | 0972-2815 | 1.43 |
| 523 | Sachinkumar Patil | Saltwater corrosion behavior of equal channel angular pressed AZ80/91 Mg alloys | Materials Today: Proceedings | 2021 | 46 (7) | 2660-2665 | 22147853 | 1.24 |
| 524 | Manjunath L H | Al/Graphene/CNT Hybrid Composites: Hardness and Sliding Wear Studies | FME Transactions | 2021 | 49(2) | 414-421 | 14512092 | |
| 525 | Manjunath L H | Heat treatment and its effect on mechanical and wear properties of Al6061/Gr/TiC hybrid MMCs | International Journal of Microstructure and Materials Properties | 2021 | 15 (4) | 316-331 | 17418410, 17418429 | 0.44 |
| 526 | Manjunath L H | Effect of microstructure ,mechanical and wear on Al-CNT’s/Graphene hybrid MMC’s | Advances in Materials and Processing Technologies | 2021 | 25(1) | 1123-1128 | 2374068X, 23740698 | 1.56 |
| 527 | LR Jagadeesh | Experimental and numerical analysis of temperature and air flow in the classroom using CFD | Materials Today: Proceedings | 2021 | 45 (1) | 385-388 | 22147853 | 1.24 |
| 528 | Somasundaram B | Erosion behaviour of HVOF sprayed WC. Co-NiCrAlYSi (35%-65%) coatings | Materials Today: Proceedings | 2021 | 45 (1) | 372-376 | 22147853 | 1.24 |
| 529 | Somasundaram B | Microstructural Characterization and Hot Corrosion Behavior of Plasma Sprayed Fe17Cr2Ni0.18C/Fly Ash Cenosphere-Based Composite Coating | SAE, International | 2021 | 14(3) | 259-274 | 26883627, 01487191 | 0.62 |
| 530 | Jegadeeswaran N | Room temperature erosion studies on titanium alloy and stellite-6 coatings | Materials Today: Proceedings | 2021 | 45 (1) | 365-371 | 22147853 | 1.24 |
| 531 | Jegadeeswaran N | Oxidation Resistance by HVOF Coating on Gas Turbine Superco-605 Materia | Materials Today: Proceedings | 2021 | 45 (1) | 54-57 | 22147853 | 1.24 |
| 532 | S Srinivas | Performance analysis of foil bearings for low friction wear | Materials Today: Proceedings | 2021 | 45 (1) | 447-450 | 22147853 | 1.24 |
| 533 | K.R.Rajesh | Selection of parameters for flash butt welding on mild steel brake tension rods | Materials Today: Proceedings | 2021 | 41(1) | 191-196 | 22147853 | 1.24 |
| 534 | Pramodkumar S | Studying the Performance of Cutting Carbon Fibre-Reinforced Plastic Using an Abrasive Water Jet Technique | Strojniški vestnik - Journal of Mechanical Engineering | 2021 | 67(4) | 135-141 | 0039-2480 | 1.67 |
| 535 | Ramesh Kumar S C | Study on mechanical properties of epoxy based Kenaf/Banana/Glass fiberhybrid nano composites | Materials Today: Proceedings | 2021 | 45 (1) | 399-403 | 22147853 | 1.24 |
| 536 | Shamanth V | Technology and Challenges in Additive Manufacturing of Duplex Stainless Steels | Biointerface Research in Applied Chemistry | 2021 | 12(1) | 1110-1119 | 20695837 | 1.95 |
| 537 | Dr. Dasharath S M | A review paper on magnesium alloy fabricated by severe plastic deformation technology and its effects over microstructural and mechanical properties | Materials Today Proceedings | 2021 | 45 (1) | 356-364 | 22147853 | 1.24 |
| 538 | Dr. Dasharath S M | Effect of cryogenic heat treatment & ageing on ultra fine grained aluminium-lithium alloy- A review | Materials Today proceedings | 2021 | 45 (1) | 338-348 | 22147853 | 1.24 |
| 539 | Dr. Dasharath S M | Investigation on mechanical properties of aluminium lithium alloy through rolling | Materials Today proceedings | 2021 | 45 (1) | 392-398 | 22147853 | 1.24 |
| 540 | Dr, Dasharath S M | Synthesis and characterization of wollastonite (CaSio3)/titanium oxide (TiO2) and hydroxyapatite (HA) ceramic composites for bio-medical applications fabricated by spark plasma sintering technology | Materials Today Proceedings | 2021 | 45 (1) | 332-337 | 22147853 | 1.24 |
| 541 | Sharath G S | Design and Analysis of Gantry Robot | Materials Today Proceedings | 2021 | 45 (1) | 377-384 | 22147853 | 1.24 |
| 542 | Sharath G S | Studies on Properties of Micro-Nano ZrO2 Particulate Metal Matrix Composites | International Journal of Vehicle Structures and Systems(IJVSS) | 2021 | 12(5) | 19-22 | 09753060, 09753540 | 0.95 |
| 543 | Robinson P | A study on structural analysis of composite beam structure | Materials Today Proceedings | 2021 | 45 (1) | 434-439 | 22147853 | 1.24 |
| 544 | Prof. Pavan D | Design and development of multipurpose cooling and drying machine | Materials Today: Proceedings | 2021 | 45 (1) | 424 | 22147853 | 1.24 |
| 545 | R.Vinod | Recent advances in loop heat pipe | Materials Today Proceedings | 2021 | 45 (1) | 389-391 | 22147853 | 1.24 |
| 546 | Veerbhadrappa | Performance and Emission Characteristics of C.I Engine Fuelled with Hybrid Biodiesel | International Journal of Vehicle Structures & Systems | 2021 | 13(1) | 006-09 | 09753060, 09753540 | 0.95 |
| 547 | ArunKumar H | Performance and Emission Characteristics of Hybrid Biofuels in DI Diesel Engine | International Journal of Vehicle Structures and Systems(IJVSS) | 2021 | 13(1) | 010-13 | 09753060, 09753540 | 0.95 |
| 548 | somesha G H | Performance test on single cylinder diesel engine by lichens Biofuel | Materials today proceedings | 2021 | 45 (1) | 161-164 | 22147853 | 1.24 |
| 549 | Suresha S | Numerical simulation aided design of heat sink using Z-cast | Materials Today Proceedings | 2021 | 45 (1) | 404-411 | 22147853 | 1.24 |
| 550 | Karthik.S | Fatigue failure analysis of fillet welded joints used in Offshore structures using numerical methods | Materials Today Proceedings | 2021 | 45 (1) | 120-122 | 22147853 | 1.24 |
| 551 | Dr C D Hampali | Design and Development of Solar Electric Tricycle | Materials Today Proceedings | 2021 | 45 (1) | 451-455 | 22147853 | 1.24 |
| 552 | Praveen Math | Analysis optimization and modelling of CO2 welding process parameters in fabrication of mild steel plates | Materials Today Proceedings | 2021 | 45 (1) | 420-423 | 22147853 | 1.24 |
| 553 | Praveen Math | Design, fabrication and analysis of air cooled heat exchanger for exhaust gas heat recovery from icengine | Journal Of XI‘AnUniversity Of Architecture & Technology | 2021 | 13(5) | 623-635 | 10067930 | 0.22 |
| 554 | Kalyana Kumar M | A study on thermomechanical properties of zirconium di oxide coated piston material of various thickness and its comparison with uncoated material | Materials today proceedings | 2021 | 45 (1) | 294-298 | 22147853 | 1.24 |
| 555 | Manjunatha G | Circular aluminium & mild steel tubes with die radius of 10 mm for energy absorption | Materials today proceedings | 2021 | 41(1) | 254-256 | 22147853 | 1.24 |
| 556 | Dr. Pramodh S Kataraki | Thermal Properties of the Graphene Oxide (GO) Reinforced Epoxy Composites (Thermal Adhesive Liquid Type): Application of Thermal Interface Materials | Lecture Notes in Mechancial Engineering | 2021 | Book chapter | 933-940 | 21954356, 21954364 | 0.55 |
| 557 | Dr. Pramodh S Kataraki | Design Optimization of Formula Student Car Steering Knuckle | Lecture Notes in Mechancial Engineering | 2021 | Book chapter | 737-745 | 21954356, 21954364 | 0.55 |
| 558 | Dr. Vijee kumar | Development and Mechanical Characterization of Al6061-Al2O3-Graphene Hybrid Metal Matrix Composites” in the Journal of Composite science | Journal of Composite science | 2021 | 5(6) | 155-161 | 2504-477X | 1.726 |
| 559 | Dr. Sachinkumar Patil | Analysis of Effect of Machining Parameters on Surface Roughness and MRR of AA3003/SiC Composite Material | Lecture Notes in Mechancial Engineering | 2021 | Book chapter | 219-226 | 21954356, 21954364 | 0.55 |
| 560 | Prof. sachin prabha | Overview on development of multi-dimensional aircraft arresting system at the time adverse failure of landing gear, | Material today Proceedings | 2021 | 45 (1) | 318-326 | 22147853 | 1.24 |
| 561 | Dr K S Narayanaswamy | Design and Development of IoT based Drone Fumigator | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 001-13 | 2349-5162 | |
| 562 | Venkatesha B K | Design and Fabrication of Flow Meter for Intravenous Infusion Tube | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 14-18 | 2349-5162 | |
| 563 | Manjunath C | Automated Multi Function Farm Robot | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 19-24 | 2349-5162 | |
| 564 | Anand Babu K | Developing A Vehicle - Based On Bicycle Dynamic Energy | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 25-29 | 2349-5162 | |
| 565 | Avinash S | Fabrication Of Solar Powered Bird Scarer |
Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 30-35 | 2349-5162 | |
| 566 | Ashwini M V | Development of Multi Utility Wheelbarrow | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 36-40 | 2349-5162 | |
| 567 | Somesha G H | Fabrication of Portable Animal Shed Cleaning | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 41-43 | 2349-5162 | |
| 568 | Praveen Math | Solar Powered Atmospheric Water Generator | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 44-50 | 2349-5162 | |
| 569 | DEEPAK.S. A | Chassis Modification of An Electric Vehicle | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 51-56 | 2349-5162 | |
| 570 | Venkatesha B K | IOT Based Smart Home Automation | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 57-60 | 2349-5162 | |
| 571 | Devaraj Sonnappa | Comparative Study of Copper and Aluminium Bronze Alloy Processed Through Die- Casting Route | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 61-68 | 2349-5162 | |
| 572 | Dr.Hemanth K | Solar Powered Refrigerator for Vaccine Transportation in Remote Areas | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 69-75 | 2349-5162 | |
| 573 | Robinson.P | Development of Child Rescue System Against Bore-Wells | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 76-80 | 2349-5162 | |
| 574 | Dr.Suresha S | Design and Fabrication of Portable Spraying Machine | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 81-86 | 2349-5162 | |
| 575 | Dr. Sachin Kumar Patil | Production and Characterization of Biofuel Produced by Non-Edible Oil |
Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 87-91 | 2349-5162 | |
| 576 | Sachin Prabha | Electrical Power Generation from Footsteps | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 92-99 | 2349-5162 | |
| 577 | Robinson.P | Development of Automated Overhead Water Tank Cleaning Machine | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 100-106 | 2349-5162 | |
| 578 | Hanumantharaya R | Arecanut /Coconut Multipurpose Contrivance |
Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 107-113 | 2349-5162 | |
| 579 | Karthik S | Development of Self Driving Vehicle | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 114-120 | 2349-5162 | |
| 580 | Ramesh Kumar S C | Fabrication of Feeder to Feed Chickens in Small Scale Poultry Farms | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 463-466 | 2349-5162 | |
| 581 | Dr. Manjunatha L H | Fabrication of Solar and Rain Pressure Cells | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 121-131 | 2349-5162 | |
| 582 | Dr. Manjunatha L.H | Fabrication of Mask Vending Machine | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 132-142 | 2349-5162 | |
| 583 | Karthik S | Semi Automated Floating Debris Cleaning Robot | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 217-222 | 2349-5162 | |
| 584 | Ashwini M V | Fabrication of Multi-Purpose Cast/Splint for Injury Recovery & Rehabilitation |
Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 143-146 | 2349-5162 | |
| 585 | Sharath G S, | Design and Development of Cylindrical Robot for Library Application | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 147-159 | 2349-5162 | |
| 586 | Hanumantharaya R | Design and Fabrication of Multipurpose Seed Sowing Machine | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 160-169 | 2349-5162 | |
| 587 | Varun Kumar Reddy | Design of Delivery Drone | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 170-175 | 2349-5162 | |
| 588 | Madhu.B P | Design and Fabrication of Seed Sowing Machine for Physically Challenged | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 176-181 | 2349-5162 | |
| 589 | Deepak.S.A | Conversion of Exhaust Heat from An IC Engine To Electric Power | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 182-184 | 2349-5162 | |
| 590 | Mahesh L | Modification of Mopped to Hybrid Bike | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 185-188 | 2349-5162 | |
| 591 | Mahesh L | Development of Petro-Electric Vehicle | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 189-192 | 2349-5162 | |
| 592 | Manjunath. C | Remote Controlled Solar Powered Pesticide Sprayer | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 193-201 | 2349-5162 | |
| 593 | Arun Kumar H | A Review On Design and Fabrication of Finger Millet (Ragi) Cutting Machine | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 2020-206 | 2349-5162 | |
| 594 | Dr Shamanth | Comparison Studies On Tensile Behavior of Al Mgâ‚â‚€ Si Alloy Produced by DMLS & A360 Alloy By Die Casting Method | Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 207-210 | 2349-5162 | |
| 595 | Gururaja Sharma T | Design and Fabrication of Portable Automatic Spot-Welding Machine |
Journal of Emerging Technologies and Innovative Research | 2021 | 8(7) | 211-216 | 2349-5162 | |
| 596 | Praveen Math | Experimental and CFD simulation of performance analysis of steam generators of boilers | Materials Today Proceedings | 2021 | 8(7) | 213-216 | 22147853 | 1.24 |
| 597 | Shanwaz Patil | Effect of micro raphite particles on the microstructure and mechanical behavior of aluminium 6061 (Al-Mg-Si) alloy composites developed by novel two step casting technique | Journal of Metals, Materials and Minerals | 2021 | 31(2) | 38-45 | 8576149 | 0.86 |
| 598 | S Devaraja | A Study of Shear Friction Factor in Friction Stir Welding for Developing a Finite Element Model and Its Importance in the Context of Formation of Defect Free and Defective Weld | Materials Today Proceedings | 2021 | 45(1) | 299-303 | 22147853 | 1.24 |
| 599 | S Devaraja | Mechanical and Moisture Absorption Behaviour of Alkali Treated Sida Acuta Composite | Transactions of the Indian Institute of Metals (TIIM) | 2021 | 74(1) | 3001-3011 | 0972-2815 | 1.43 |
| 600 | Praveen Math | Experimental and CFD simulation of performance analysis of steam generators of boilers | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 601 | Hanumantharaya R | Influence of tab corner geometry on supersonic jets | Aircraft Engineering and Aerospace Technology | 2021 | 93(10) | 1656-1663 | 22667 | 1.08 |
| 602 | Balaji S | PERFORMANCE ASSESSMENT OF LPG COOLING SYSTEM-A REVIEW | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 205-211 | 2349-5162 | |
| 603 | Dr. N Jagadeeswaran | Design and fabrication of bluetooth based solar grass cutter | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 199-204 | 2349-5162 | |
| 604 | Sharantej reddy | Fabrication and modification of coconut tree sprayer | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 195-198 | 2349-5162 | |
| 605 | Manjunath G | Manually operated hydraulic robotic arm | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 223-226 | 2349-5162 | |
| 606 | Dr. Somasundar B | Structural analysis of Multitargetting Radar. | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 187-194 | 2349-5162 | |
| 607 | Vinod R | Oxidation Stability of Waste Cooking Oil Methyl Ester | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 181-186 | 2349-5162 | |
| 608 | Nagasuresh Babu | Application of lean six Sigma methodology in manufacturing organization | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 168-180 | 2349-5162 | |
| 609 | Srinivas | Paddy threshing machine by manual and automated method | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 161-167 | 2349-5162 | |
| 610 | Dharamendra | Pneumatic damping prosthetic leg for above knee amputees | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 154-160 | 2349-5162 | |
| 611 | Madhu B P | SOLAR POWERED WEEDER USING WHITWORTH MECHANISM | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 149-153 | 2349-5162 | |
| 612 | Dharamendra | Design and fabrication of MULTIPURPOSE SEED SOWING MACHINE | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 144-148 | 2349-5162 | |
| 613 | Pradip Gunaki | Design and fabrication of Areca bunch separator | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 135-143 | 2349-5162 | |
| 614 | Balaji S | Design and Analysis of ATV Chassis | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 125-134 | 2349-5162 | |
| 615 | Pavan | Design and fabrication of atmospheric Water Generator for drinking | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 119-124 | 2349-5162 | |
| 616 | Manjunath G K | Study of Adverse effects of cutting fluids in metal cutting and analysis. | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 114-118 | 2349-5162 | |
| 617 | Rajesh Babu | Low cost paper pot transplanter for agriculture using solar power(I) | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 108-113 | 2349-5162 | |
| 618 | Shanwaz Patil | Design and fabrication of Sterring controlled headlight. | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 101-107 | 2349-5162 | |
| 619 | ArunKumar H | AUTOMATED WASTE SEGREGATION SYSTEM | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 47-51 | 2349-5162 | |
| 620 | Dr. Niranjan H | Reduction in Sloshing Using Baffle Plate | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 40-46 | 2349-5162 | |
| 621 | Dr. C D Hampali | DESIGN AND DEVELOPMENT OF SOLAR ELECTRIC TRICYCLE | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 31-39 | 2349-5162 | |
| 622 | Nagasuresh Babu | OPTIMISATION OF PROCESS PARAMETERS OF PVD COATED CARBIDE TIP TOOLS (TiCN and TiAlN) BY TAGUCHI AND LEAN SIGMA TECHNIQUE | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 21-30 | 2349-5162 | |
| 623 | channabasava | POWER GENERATION USING SPEED BREAKERS | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 18-20 | 2349-5162 | |
| 624 | Vinod R | A Review on Thermal Comfort of a Room | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 14-17 | 2349-5162 | |
| 625 | Shreyas | Remote Controlled Pesticide Sprayer | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 11-13 | 2349-5162 | |
| 626 | Dr. Shamanth v | A REVIEW ON DIRECT METAL LASER SINTERING | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 06-10 | 2349-5162 | |
| 627 | L R Jagadeesh | DESIGN AND DEVELOPMENT OF GANTRY ROBOT FOR OBJECT VALIDATION OF PALLETS | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 01-05 | 2349-5162 | |
| 628 | Karthik S | IOT BASED MONITORING OF COMMUNITY BIOGAS PLANT FOR SMART CITY APPLICATION | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 94-100 | 2349-5162 | |
| 629 | Karthik S | METERING AND CONTROLLING OF WATER SUPPLY USING GSM FOR SMART CITY APPLICATION | Journal of Emerging Technologies and Innovative Research | 2021 | 8(8) | 89-93 | 2349-5162 | |
| 630 | Dr. Somasundar B | Electrochemical studies of heat-treated NiCrMoFeCoAl and NiCrMoFeCoAl-30%Cr3C2 HVOF coatings on T22 boiler steel | Applied Ceramic Technology | 2021 | Article in press | 1546542X, 17447402 | 1.9 | |
| 631 | Hanumantharaya R | Experimental Investigation and Optimization of Compression Molding Parameters for MWCNT/Glass/Kevlar/Epoxy Composites on Mechanical and Tribological Properties | Journal of Materials research nad Technology | 2021 | 15(1) | 327-341 | 22387854 | 4.88 |
| 632 | Deepak S A | Simply supported polygon | IJVSS | 2021 | 13(5) | 630-633 | 09753060, 09753540 | 0.95 |
| 633 | Somasundaram B | Microstructural Characterization and Hot Corrosion Behavior of Plasma-Sprayed Fe17Cr2Ni0.18C/Fly Ash Cenosphere-Based Composite Coating (sae.org) |
SAE Int Journal of materials and manufacturing | 2021 | 14(3) | 259-274 | 26883627, 01487191 | 0.62 |
| 634 | Nithin S K & Hemanth K | Importance of Condition Monitoring in Mechanical Domain | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 635 | Srinivas S | Energy requirement for hybrid vehicles | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 636 | Srinivas S | A review on vibration analysis and their behaviour of complex structures | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 637 | G. K. Manjunath | Effect of zinc content on the microstructure and mechanical properties of Al-Zn-Mg alloy | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 638 | Manjunatha G | Quasi-static uni-directional compression of Aluminium & Steel tubes between two flat platens for Energy absorption | Materials Today Proceedings | 2021 | 8(11) | 38-47 | 22147853 | 1.24 |
| 639 | Ramesh kumar S C | Water Absorption Behavior of Hybrid Nano Natural Fiber Reinforced Composites | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 640 | Avinash.Srineevasan | Study on Mechanical Properties of AZ91 Magnesium Alloy | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 641 | RAGHAVENDRA B.S | EFFECT OF SURFACE TREATMENT ON TENSILE AND BUCKLING CHARECTERSITCS OF NATURAL FIBRE BASED HYBRID COMPOSITES | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 642 | B.Somasundaram | Microstructure Characteristics and Properties of WC-CrC-Ni HVOF Coating for Boiler Tube Steel | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 643 | S. MADHUSUDHANA & MLH | Study on Preparation and Mechanical Characterization of Functionally Graded Al2024-Albite Aluminum Matrix Composites Using Powder Metallurgy Technique | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 644 | Anilkumar P R MLH | Study on Mechanical Properties of Hybrid Epoxy Nano Composites Reinforced with Graphene and Nano Silica | Materials Today Proceedings | 2021 | 31 (1) | 149-165 | 22147853 | 1.24 |
| 645 | Harish Kumar N S, Manjunath C | Reliability, Availability and Maintainability Study of 6.5 cubic meters Shovel and 60 Tone Dumper in a Surface Limestone Mine | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 646 | Prabhakar C G, Anand Babu K | A review on Mechanical Properties of Banyan and Banana fibers composites. | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 647 | Shikha N Singh | ERGONOMICS CONTROL - ASSEMBLY STATION | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 648 | Madhu B P | Design and Development of 2D X-Y Platter with Pyrographic pen | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 649 | Pradip Gunaki | Process Optimization by Value Stream Mapping | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 650 | Ashwini M V | Fabrication of Multi-Purpose Cast/Splint for Injury Recovery & Rehabilitation | Materials Today Proceedings | 2021 | 8(7) | 143-146 | 22147853 | 1.24 |
| 651 | C Rajesh Babu | A Comprehensive Review On Compound Heat Transfer Enhancement Using Passive Techniques In A Heat Exchanger | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 652 | Kalyana Kumar M | PERFORMANCE STUDY OF DIESEL ENGINE USING SILK WORM AND PONGAMIA PINNATA AT VARIOUS BLENDS | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 653 | Sachin Prabha | Research on Development of Ecofriendly & self-energizing Air-conditioner unit design over the Conservative technique | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 654 | Channabasav | Numerical analysis of laminar to turbulent transition boundary layer flow | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 655 | Veerbhadrappa Telgane | Dairy Scum Methyl ester production and its performance testing on a CI engine at different compression ratios | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 656 | Venkatagowda & MLH | Dynamic Mechanical Behavior of Natural Fibers Reinforced Polymer Matrix Composites - A Review | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 657 | Parameshwara & VBK | Numerical Vibroacoustic Analysis of Segmented Aluminum Fuselage of Aircraft with Blankets | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 658 | Dr Dasharath | Classification and applications of titanium and its alloys | Materials Today Proceedings | 2021 | Article in press | |||
| 659 | Dr Dasharath | A review paper on magnesium alloy fabricated by severe plastic deformation technology and its effects over microstructural and mechanical properties | Materials Today Proceedings | 2021 | Article in press | |||
| 660 | Manjunath G K | Effect of zinc content on the microstructure and mechanical properties of Al-Zn-Mg alloy | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 661 | Madhu B P | Design and Development of 2D X-Y Platter with Pyrographic Pen | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 662 | Rajesh K R | ERGONOMICS CONTROL - ASSEMBLY STATION | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 663 | Dasharath SM | Effect of cryogenic heat treatment & ageing on ultra fine grained aluminium-lithium alloy- A review | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 664 | Dasharath SM | Investigation on mechanical properties of aluminium lithium alloy through rolling | Materials Today Proceedings | 2021 | 45 (1) | 392-398 | 22147853 | 1.24 |
| 665 | Shivashankara B S & Venkatesha B K | Effect of processing route on grain refinement and mechanical properties in ECAP of Aluminium alloy AA7068 | Journal of mines metals and fuels | 2021 | 6(6) | 214-218 | 0022-2755 | 0.07 |
| 666 | Chandra Mohan H K & Dr Devaraj S | Conventional Sintering of Copper Powder with and without Addition of Different Weight Percentage of Aluminium Powder | Journal of mines metals and fuels | 2021 | 12(4) | 08-13 | 0022-2755 | 0.07 |
| 667 | Jegadeeswaran N | Characterization of Stellite-6 HVOF Coatings on Titanium Alloy | Journal of mines metals and fuels | 2021 | 12(4) | 20-23 | 0022-2755 | 0.07 |
| 668 | Venkatesha B K | EFFECT OF CENOSPHERE ON MOISTURE ABSORPTION PERFORMANCE OF WOVEN HYBRID BAMBOO-GLASS FIBER REINFORCED EPOXY COMPOSITES | Journal of mines metals and fuels | 2021 | 12(4) | 447-451 | 0022-2755 | 0.07 |
| 669 | Vinod kumar M S & Dr N Jegadeeswaran | Study of Solid Particle Erosion of Thermal Spray Coated and Uncoated Cobalt based Superalloy | Journal of mines metals and fuels | 2021 | 12(4) | 31-36 | 0022-2755 | 0.07 |
| 670 | Deepak Kumar T & Venkatesh B K | Performance and emissions characteristics of biodiesel in diesel engine | Journal of mines metals and fuels | 2021 | 12(4) | 44-47 | 0022-2755 | 0.07 |
| 671 | Vinod R | EFFECT OF INJECTION TIMING ON THE PERFORMANCE OF CRDI DIESEL ENGINE FUELED WITH FISH OIL BIODIESEL AND ITS BLENDS DOPED WITH PYROGALLOL ANTIOXIDANTS | Journal of mines metals and fuels | 2021 | 12(4) | 48-61 | 0022-2755 | 0.07 |
| 672 | Keerthi Kumar & Veerabadrappa | Combustion, Performance and Emission Characteristics of 4- Stroke Diesel Engine using Simarouba and graphene nanoparticles | Journal of mines metals and fuels | 2021 | 12(4) | 62-66 | 0022-2755 | 0.07 |
| 673 | Deepak S A | Buckling Analysis of Thick Plates Using a Simple Higher Order Shear Deformation Theory | Journal of mines metals and fuels | 2021 | 12(4) | 67-72 | 0022-2755 | 0.07 |
| 674 | Hanumantharaya R | MECHANICAL AND WEAR BEHAVIOUR OF FLY ASH REINFORCED EPOXY COMPOSITES | Journal of mines metals and fuels | 2021 | 12(4) | 78-83 | 0022-2755 | 0.07 |
| 675 | Shanawaz Patil | Effect of Beryl and Graphene Nano Platelets Reinforcements on the Wear Behaviour of Al7075-Beryl Graphene Particulate Hybrid Composites | Journal of mines metals and fuels | 2021 | 12(4) | 84-91 | 0022-2755 | 0.07 |
| 676 | Shreyas P S | Evaluating of Mechanical Properties for Aluminium Based Hybrid Composites Reinforced With Al2O3 & ZrO2 Nano Particles | Journal of mines metals and fuels | 2021 | 12(4) | 429-433 | 0022-2755 | 0.07 |
| 677 | R Raghavendra Rao & Avianash S | Effect of fiber orientation on the mechanical properties of unidirectional Basalt fiber reinforced polymer matrix composites | Journal of mines metals and fuels | 2021 | 12(4) | 97-101 | 0022-2755 | 0.07 |
| 678 | Deepak Kumar T & Venkatesh B K | Performance and emission characteristics of a diesel engine using Bio diesel blended with Nano additives | Journal of mines metals and fuels | 2021 | 12(4) | 113-116 | 0022-2755 | 0.07 |
| 679 | Dinesha Kumara HM & CD Hampali | CFD Analysis of combustion liner with different Geometry holes for Effussion film cooling | Journal of mines metals and fuels | 2021 | 12(4) | 117-122 | 0022-2755 | 0.07 |
| 680 | Shashidhara L C & Dr KS Narayana swamy | Mixed-Mode Fracture (KI & KII) Evaluation in Epoxy Resin using ASENB Configuration | Journal of mines metals and fuels | 2021 | 12(4) | 129-136 | 0022-2755 | 0.07 |
| 681 | Nagayya & VBK | STRENGTH AND FAILURE ANALYSIS OF CARBON FIBER REINFORCED POLYMER (CFRP) AND TITANIUM(TI) ALLOY AXISYMMETRIC LAP JOINT | Journal of mines metals and fuels | 2021 | 12(4) | 137-141 | 0022-2755 | 0.07 |
| 682 | MANJUNATHA | Effects of Aluminium, Zirconium and Fly-ash mixture coated on EN8-Steel and Study the Three Body Abrasive Wear Behavior of EN8-Steel | Journal of mines metals and fuels | 2021 | 12(4) | 60-67 | 0022-2755 | 0.07 |
| 683 | Sachin Prabha | DEVELOPMENT AND CHARACTERIZATION OF POLYMER MATRIX COMPOSITES USING POLYESTER, HEMP AND CALCIUM SILICATE | Journal of mines metals and fuels | 2021 | 12(4) | 07-24 | 0022-2755 | 0.07 |
| 684 | S Prashantha Dr Shanwaz | Effect of Hydrogen Embrittlement on the characteristics of Copper-based Shape Memory Alloy | Journal of mines metals and fuels | 2021 | 12(4) | 159-162 | 0022-2755 | 0.07 |
| 685 | Rizal Mohamed Noor & Dr Pramod Kumar | Optimization of Cutting Parameters To Improve Power Consumption And Material Removal Rate In High Efficient Milling | Journal of mines metals and fuels | 2021 | 12(4) | 163-169 | 0022-2755 | 0.07 |
| 686 | Balaji.S | PERFORMANCE AND NOX EMISSIONS OF MAHUA ESTER BLENDS WITH PYROGALLOL ANTIOXIDANT IN A SINGLE CYLINDER DIESEL ENGINE | Journal of mines metals and fuels | 2021 | 12(4) | 170-174 | 0022-2755 | 0.07 |
| 687 | Varadaraj K | Performance and Emissions Analysis of Diesel Engine Fueled with Exhaust Gas Energy Preheated ROME Biodiesel | Journal of mines metals and fuels | 2021 | 12(4) | 175-178 | 0022-2755 | 0.07 |
| 688 | R Vara Prasad Kaviti &Rameshkumar SC | INVESTIGATION OF WEAR BEHAVIOR OF MAGNESIUM REINFORCED WITH BORON NITRIDE NANOCOMPOSITE USING ANN | Journal of mines metals and fuels | 2021 | 12(4) | 190-194 | 0022-2755 | 0.07 |
| 689 | Kadir A Ajij Shaikh, vijee kumar | PRODUCTION AND CHARACTERIZATION OF TITANIUM BASED METAL MATRIX COMPOSITES: A REVIEW | Journal of mines metals and fuels | 2021 | 12(4) | 195-198 | 0022-2755 | 0.07 |
| 690 | Madeva Nagaral & Dr Shanawaz | Influence of Micro Graphite Particles on the Microstructure and Wear Behavior of Aluminium 6061 Alloy Composites Developed by Two Step Casting Process | Journal of mines metals and fuels | 2021 | 12(4) | 38-45 | 0022-2755 | 0.07 |
| 691 | Nithin H S & Anand babu | Comparative study on high temperature oxidation behaviour of CoCrAlY coatings by various reinforcement composition profile analysis | Journal of mines metals and fuels | 2021 | 12(4) | 01-11 | 0022-2755 | 0.07 |
| 692 | AMAR GANDGE SUBASH &CD Hampali | DESIGN AND NUMERICAL ANALYSIS ON SUPER SONIC ROCKET NOZZLE | Journal of mines metals and fuels | 2021 | 12(4) | 234-239 | 0022-2755 | 0.07 |
| 693 | Mahadev & Pavan D | Modeling and Structural Analysis of Bicycle Frame Using FEA for Different Materials | Journal of mines metals and fuels | 2021 | 12(4) | 240-249 | 0022-2755 | 0.07 |
| 694 | Sanman S & Venkatesh B K | EFFECT OF PERCENTAGE OF REINFORCEMENT PARTICULATES ON THE CORROSION BEHAVIOR OF ALUMINUM BORON CARBIDE COMPOSITES | Journal of mines metals and fuels | 2021 | 12(4) | 250-254 | 0022-2755 | 0.07 |
| 695 | Rakesh C M & Niranjan H | A STUDY ON PERFORMANCE OF SURFACE MODIFIED NACA 2412 AIRFOIL AT VARIOUS REYNOLD’S NUMBER AND ANGLE OF ATTACKS | Journal of mines metals and fuels | 2021 | 12(4) | 269-275 | 0022-2755 | 0.07 |
| 696 | Vinod R | A Comparative Study of Biodiesel Production by Microwave assisted and conventional Transesterification methods | Journal of mines metals and fuels | 2021 | 12(4) | 276-280 | 0022-2755 | 0.07 |
| 697 | T S Raghu & Kalyankumar | A Study on The Applications of Vibratory Motor for Material Handling Vehicles | Journal of mines metals and fuels | 2021 | 12(4) | 281-289 | 0022-2755 | 0.07 |
| 698 | Prashanth K P & VBK | STUDY OF THERMAL STABILITY AND ADHESION PROPERTY OF CHITOSAN BASED BIODEGRADEBLE COMPOSITE | Journal of mines metals and fuels | 2021 | 12(4) | 290-295 | 0022-2755 | 0.07 |
| 699 | HARSHA.S, Dasharath S M | Investigation On Mechanical Properties of Aluminium 8090 Alloy Through Room Temperature Rolling | Journal of mines metals and fuels | 2021 | 12(4) | 338-348 | 0022-2755 | 0.07 |
| 700 | Praveen Math | A STUDY ON EFFECT OF CO2 WELDING PROCESS PARAMETER ON MICROHARDNESS OF STRUCTURAL STEEL | Journal of mines metals and fuels | 2021 | 12(4) | 102-105 | 0022-2755 | 0.07 |
| 701 | Arunkumar H | Effect of venture design on the performance of CNG and Biogas operated dual fuel engine with Jamun seed oil methyl ester blends | Journal of mines metals and fuels | 2021 | 12(4) | 310-316 | 0022-2755 | 0.07 |
| 702 | G. K. Manjunath | Optimization of processing conditions in equal channel angular pressing for superior structure and properties | Journal of mines metals and fuels | 2021 | 12(4) | 317-323 | 0022-2755 | 0.07 |
| 703 | Pradip Gunaki | UTILIZATION OF INDIAN RAILWAY BIO-TOILET WASTE AS AN AGRICULTURE FERTILIZER | Journal of mines metals and fuels | 2021 | 12(4) | 324-325 | 0022-2755 | 0.07 |
| 704 | Dr Suresh S | STATIC STRUCTURAL AND LINEAR BUCKLING ANALYSIS OF DIESEL GENERATOR CONNECTING ROD | Journal of mines metals and fuels | 2021 | 12(4) | 326-330 | 0022-2755 | 0.07 |
| 705 | Ashwini | Modern cast/splint for external physical injuries & rehabilitation | Journal of mines metals and fuels | 2021 | 12(4) | 331-333 | 0022-2755 | 0.07 |
| 706 | Dr Vijeekumar | Synthesis of ceramic-based composite | Journal of mines metals and fuels | 2021 | 12(4) | 192-196 | 0022-2755 | 0.07 |
| 707 | Dr. Niranjan H | Experimental investigation for the determination of material properties of a composite laminate using resin and DIC techniques | Materials Today Proceedings | 2021 | 45(1) | 231-235 | 22147853 | 1.24 |
| 708 | Dr. Niranjan H | Design and Analysis of Different Solar Still Structures” | Journal of Emerging Technologies and Innovative Research | 2021 | 8(9) | 2349-5162 | ||
| 709 | Dr. Shamanth v | Voltammetric Determination of Various Food Azo Dyes Using Different Modified Carbon Paste Electrodes | Biointerface Research in Applied Chemistry | 2021 | 12(4) | 4557-4566 | 20695837 | 1.95 |
| 710 | Dr. Somasundar B | Microstructure Characteristics and Properties of NiCrMoFeCoAl HVOF Coating for T22 Boiler tube Stee | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 711 | Vinod kumar M S & Dr N Jegadeeswaran | Study of Solid Particle Erosion of Thermal Spray Coated and Uncoated Cobalt based Superalloy | Journal of mines metals and fuels | 2021 | 12(4) | 336-340 | 0022-2755 | 0.07 |
| 712 | Prabhakaran D and Jegadeeswaran N | Oxidation Resistance by HVOF Coating on MDN steel of turbine materials | Journal of mines metals and fuels | 2021 | 45(1) | 54-57 | 0022-2755 | 0.07 |
| 713 | Nalinikumari & Jegadeeswaran N | Development of CNT Mixed HVOF coating for Water tube boiler material to improve the degradation | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 714 | Sharan Teja Reddy K | Study of dual grain microstructure heat treatment in steel specimen representing gas turbine rotor disc | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 715 | Sharan Teja Reddy K | Concentration of gold nanoparticles at near Zero-cost | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 716 | Suresha S | Tribological characteristics of Al6061, boron, and graphite hybrid metal matrix composites | Advances in Materials and Processing Technologies | 2021 | Article in press | 2374-068X | 1.56 | |
| 717 | Sachinkumar Patil | Microstructure characteristics and properties of NiCrMoFeCoAl HVOF coating for T22 boiler tube steel | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 718 | Dr. Manjunath L H | Development Of Al 6061 Mwcnt MMMC Processed By Multi-Directional Forging | Materials Today Proceedings | 2021 | Article in press | 22147853 | 1.24 | |
| 719 | Varun Kumar Reddy | Performance and emission evaluation of diesel engine fuled with exhaust gas energy preheated CAOME biodisel | Materials Today Proceedings | 2021 | 45(1) | 290-293 | 22147853 | 1.24 |
| 720 | N Jagadeeswaran | Effect of carbon nanotubes on microhardness and adhesion strength of high-velocity oxy-fuel sprayed NiCr-Cr3C2 coatings | Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications | 2021 | 236(1) | 86-96 | 2158-2440 | 1.356 |
| Journals (January - December 2021) | |||||||
|---|---|---|---|---|---|---|---|
| Sl.No | Name of The Author | Title of the Paper | Journal Name | Year | Issue | Page No. | Indexed UGC/Scoupus/Web of Science |
| 1 | S. Devaraj | Effect of Macroalloying Element Addition of Aluminum on Pure Copper | Metallography, Microstructure, and Analysis | 2021 | 001-10 | Scoupus | |
| 2 | S. Devaraj | Free vibration and moisture absorption behavior of sida acuta fibre polymer composite | Emerging Materials Research | 2021 | 1 | 001-10 | Scoupus |
| 3 | S. Devaraj | Microstructural and Mechanical Characterizationof Spark-Plasma-Sintered Compact of Al-4.5 wt.% CuAlloy Powder | Journal of Materials Engineering and Performance | 2021 | 001-06 | Scoupus | |
| 4 | S. Devaraj | A review on influence of nano-fluid MQL in machining processes | AIP Conference Proceedings | 2021 | 1 | 20011 | WOS |
| 5 | S. Devaraj | A review on effect of processing parameters on mechanical properties of MMCs by friction stir process | AIP Conference Proceedings | 2021 | 1 | 20040 | WOS |
| 6 | Hemanth K. | Study the dynamic behaviour of seven DOF of full car model with semi-active suspension system | International Journal of Vehicle Performance | 2021 | (1/2) | 21-40 | Scoupus |
| 7 | Hemanth K. | Performance analysis of MR damperbased semi-active suspension systemusing optimally tuned controllers | Proc IMechE Part D:J Automobile Engineering | 2021 | 001-14 | WOS | |
| 8 | Sachinkumar Patil | Analysis of the Effect of Friction Stir Welding Parameters on Characteristics of AA6061 Composites using Response Surface Methodology | Transactions of the Indian Institute of Metals (TIIM) | 2021 | 001-12 | WOS | |
| 9 | Sachinkumar Patil | Saltwater corrosion behavior of equal channel angular pressed AZ80/91 Mg alloys | Materials Today: Proceedings | 2021 | Scoupus | ||
| 10 | Al/Graphene/CNT Hybrid Composites: Hardness and Sliding Wear Studies | FME Transactions | 2021 | 2 | 414-421 | Scoupus | |
| 11 | Heat treatment and its effect on mechanical and wear properties of Al6061/Gr/TiC hybrid MMCs | International Journal of Microstructure and Materials Properties | 2021 | 1 | Scoupus | ||
| 12 | Manjunath L H | Effect of microstructure ,mechanical and wear on Al-CNT's/Graphene hybrid MMC's | Advances in Materials and Processing Technologies | 2021 | 1123-1128 | Scoupus | |
| 13 | LR Jagadeesh | Experimental and numerical analysis of temperature and air flow in the classroom using CFD | Materials Today: Proceedings | 2021 | Scoupus | ||
| 14 | Somasundaram B | Erosion behaviour of HVOF sprayed WC. Co-NiCrAlYSi (35%-65%) coatings | Materials Today: Proceedings | 2021 | Scoupus | ||
| 15 | Somasundaram B | Microstructural Characterization and Hot Corrosion Behavior of Plasma Sprayed Fe17Cr2Ni0.18C/Fly Ash Cenosphere-Based Composite Coating | SAE, International | 2021 | 3 | Scoupus | |
| 16 | Jegadeeswaran N | Room temperature erosion studies on titanium alloy and stellite-6 coatings | Materials Today: Proceedings | 2021 | Scoupus | ||
| 17 | Jegadeeswaran N | Oxidation Resistance by HVOF Coating on Gas Turbine Superco-605 Materia | Materials Today: Proceedings | 2021 | Scoupus | ||
| 18 | S Srinivas | Performance analysis of foil bearings for low friction wear | Materials Today: Proceedings | 2021 | 7 | Scoupus | |
| 19 | K.R.Rajesh | Selection of parameters for flash butt welding on mild steel brake tension rods | Materials Today: Proceedings | 2021 | Scoupus | ||
| 20 | Pramodkumar S | Studying the Performance of Cutting Carbon Fibre-Reinforced Plastic Using an Abrasive Water Jet Technique | Strojniški vestnik – Journal of Mechanical Engineering | 2021 | 4 | 135-141 | WOS |
| 21 | Ramesh Kumar S C | Study on mechanical properties of epoxy based Kenaf/Banana/Glass fiberhybrid nano composites | Materials Today: Proceedings | 2021 | Scoupus | ||
| 22 | Shamanth V | Technology and Challenges in Additive Manufacturing of Duplex Stainless Steels | Biointerface Research in Applied Chemistry | 2021 | 1 | 1110-1119 | WOS |
| 23 | Dr. Dasharath S M | A review paper on magnesium alloy fabricated by severe plastic deformation technology and its effects over microstructural and mechanical properties | Materials Today Proceedings | 2021 | Scopus | ||
| 24 | Dr. Dasharath S M | Effect of cryogenic heat treatment & ageing on ultra fine grained aluminium–lithium alloy- A review | Materials Today proceedings | 2021 | Scopus | ||
| 25 | Dr. Dasharath S M | Investigation on mechanical properties of aluminium lithium alloy through rolling | Materials Today proceedings | 2021 | Scopus | ||
| 26 | Dr, Dasharath S M | Synthesis and characterization of wollastonite (CaSio3)/titanium oxide (TiO2) and hydroxyapatite (HA) ceramic composites for bio-medical applications fabricated by spark plasma sintering technology | Materials Today Proceedings | 2021 | Scopus | ||
| 27 | Sharath G S | Design and Analysis of Gantry Robot | Materials Today Proceedings | 2021 | Scopus | ||
| 28 | Sharath G S | Studies on Properties of Micro-Nano ZrO2 Particulate Metal Matrix Composites | International Journal of Vehicle Structures and Systems(IJVSS) | 2021 | Scopus | ||
| 29 | Robinson P | A study on structural analysis of composite beam structure | Materials Today Proceedings | 2021 | Scopus | ||
| 30 | Prof. Pavan D | Design and development of multipurpose cooling and drying machine | Materials Today: Proceedings | 2021 | 424 | Scopus | |
| 31 | R.Vinod | Recent advances in loop heat pipe | Materials Today Proceedings | 2021 | 389-396 | Scopus | |
| 32 | Veerbhadrappa | Performance and Emission Characteristics of C.I Engine Fuelled with Hybrid Biodiesel | International Journal of Vehicle Structures & Systems | 2021 | 006-09 | Scopus | |
| 33 | ArunKumar H | Performance and Emission Characteristics of Hybrid Biofuels in DI Diesel Engine | International Journal of Vehicle Structures and Systems(IJVSS) | 2021 | 010-13 | Scopus | |
| 34 | somesha G H | Performance test on single cylinder diesel engine by lichens Biofuel | Materials today proceedings | 2021 | 161 | Scopus | |
| 35 | Suresha S | Numerical simulation aided design of heat sink using Z-cast | Materials Today Proceedings | 2021 | 404 | Scopus | |
| 36 | Karthik.S | Fatigue failure analysis of fillet welded joints used in Offshore structures using numerical methods | Materials Today Proceedings | 2021 | Scopus | ||
| 37 | Dr C D Hampali | Design and Development of Solar Electric Tricycle | Materials Today Proceedings | 2021 | Scopus | ||
| 38 | Praveen Math | Analysis optimization and modelling of CO2 welding process parameters in fabrication of mild steel plates | Materials Today Proceedings | 2021 | 113-116 | Scopus | |
| 39 | Praveen Math | Design, fabrication and analysis of air cooled heat exchanger for exhaust gas heat recovery from icengine | Journal Of XI‘AnUniversity Of Architecture & Technology | 2021 | 5 | 623-635 | Scopus |
| 40 | Kalyana Kumar M | A study on thermomechanical properties of zirconium di oxide coated piston material of various thickness and its comparison with uncoated material | Materials today proceedings | 2021 | 294 | Scopus | |
| 41 | Manjunatha G | Circular aluminium & mild steel tubes with die radius of 10 mm for energy absorption | Materials today proceedings | 2021 | 1 | Scopus | |
| 42 | Dr. Pramodh S Kataraki | Thermal Properties of the Graphene Oxide (GO) Reinforced Epoxy Composites (Thermal Adhesive Liquid Type): Application of Thermal Interface Materials | Lecture Notes in Mechancial Engineering | 2021 | WOS | ||
| 43 | Dr. Pramodh S Kataraki | Design Optimization of Formula Student Car Steering Knuckle | Lecture Notes in Mechancial Engineering | 2021 | WOS | ||
| 44 | Dr. Vijee kumar | Development and Mechanical Characterization of Al6061-Al2O3-Graphene Hybrid Metal Matrix Composites†in the Journal of Composite science | Journal of Composite science | 2021 | 001-15 | Scopus | |
| 45 | Dr. Sachinkumar Patil | Analysis of Effect of Machining Parameters on Surface Roughness and MRR of AA3003/SiC Composite Material | Lecture Notes in Mechancial Engineering | 2021 | WOS | ||
| 46 | Prof. sachin prabha | Overview on development of multi-dimensional aircraft arresting system at the time adverse failure of landing gear, | Material today Proceedings | 2021 | 1 | 318-326 | Scopus |
| 47 | Dr K S Narayanaswamy | Design and Development of IoT based Drone Fumigator | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | 001-13 | UGC |
| 48 | Venkatesha B K | Design and Fabrication of Flow Meter for Intravenous Infusion Tube | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 49 | Manjunath C | Automated Multi Function Farm Robot | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 50 | Anand Babu K | Developing A Vehicle - Based On Bicycle Dynamic Energy | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 51 | Avinash S | Fabrication Of Solar Powered Bird Scarer |
Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 52 | Ashwini M V | Development of Multi Utility Wheelbarrow | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 53 | Somesha G H | Fabrication of Portable Animal Shed Cleaning | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 54 | Praveen Math | Solar Powered Atmospheric Water Generator | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 55 | DEEPAK.S. A | Chassis Modification of An Electric Vehicle | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 56 | Venkatesha B K | IOT Based Smart Home Automation | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 57 | Devaraj Sonnappa | Comparative Study of Copper and Aluminium Bronze Alloy Processed Through Die- Casting Route | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 58 | Dr.Hemanth K | Solar Powered Refrigerator for Vaccine Transportation in Remote Areas | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 59 | Robinson.P | Development of Child Rescue System Against Bore-Wells | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 60 | Dr.Suresha S | Design and Fabrication of Portable Spraying Machine | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 61 | Dr. Sachin Kumar Patil | Production and Characterization of Biofuel Produced by Non-Edible Oil |
Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 62 | Sachin Prabha | Electrical Power Generation from Footsteps | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 63 | Robinson.P | Development of Automated Overhead Water Tank Cleaning Machine | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 64 | Hanumantharaya R | Arecanut /Coconut Multipurpose Contrivance |
Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 65 | Karthik S | Development of Self Driving Vehicle | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 66 | Ramesh Kumar S C | Fabrication of Feeder to Feed Chickens in Small Scale Poultry Farms | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 67 | Dr. Manjunatha L H | Fabrication of Solar and Rain Pressure Cells | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 68 | Dr. Manjunatha L.H | Fabrication of Mask Vending Machine | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 69 | Karthik S | Semi Automated Floating Debris Cleaning Robot | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 70 | Ashwini M V | Fabrication of Multi-Purpose Cast/Splint for Injury Recovery & Rehabilitation |
Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 71 | Sharath G S, | Design and Development of Cylindrical Robot for Library Application | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 72 | Hanumantharaya R | Design and Fabrication of Multipurpose Seed Sowing Machine | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 73 | Varun Kumar Reddy | Design of Delivery Drone | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 74 | Madhu.B P | Design and Fabrication of Seed Sowing Machine for Physically Challenged | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 75 | Deepak.S.A | Conversion of Exhaust Heat from An IC Engine To Electric Power | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 76 | Mahesh L | Modification of Mopped to Hybrid Bike | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 77 | Mahesh L | Development of Petro-Electric Vehicle | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 78 | Manjunath. C | Remote Controlled Solar Powered Pesticide Sprayer | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 79 | Arun Kumar H | A Review On Design and Fabrication of Finger Millet (Ragi) Cutting Machine | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 80 | Dr Shamanth | Comparison Studies On Tensile Behavior of Al Mgâ‚â‚€ Si Alloy Produced by DMLS & A360 Alloy By Die Casting Method | Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 81 | Gururaja Sharma T | Design and Fabrication of Portable Automatic Spot-Welding Machine |
Journal of Emerging Technologies and Innovative Research | 2021 | 7 | UGC | |
| 82 | Praveen Math | Experimental and CFD simulation of performance analysis of steam generators of boilers | Materials Today Proceedings | 2021 | Scopus | ||
| 83 | Shanwaz Patil | Effect of micro raphite particles on the microstructure and mechanical behavior of aluminium 6061 (Al-Mg-Si) alloy composites developed by novel two step casting technique | Journal of Metals, Materials and Minerals | 2021 | 2 | 38-45 | Scopus |
| 84 | S Devaraja | A Study of Shear Friction Factor in Friction Stir Welding for Developing a Finite Element Model and Its Importance in the Context of Formation of Defect Free and Defective Weld | Materials Today Proceedings | 2021 | 1 | Scopus | |
| 85 | S Devaraja | Mechanical and Moisture Absorption Behaviour of Alkali Treated Sida Acuta Composite | Transactions of the Indian Institute of Metals (TIIM) | 2021 | Web of science | ||
| 86 | Praveen Math | Experimental and CFD simulation of performance analysis of steam generators of boilers | Materials Today Proceedings | 2021 | Scopus | ||
| 87 | Hanumantharaya R | Influence of tab corner geometry on supersonic jets | Aircraft Engineering and Aerospace Technology | 2021 | Web of science | ||
| 88 | Balaji S | Design and fabrication of LPG refrigeration System | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 89 | Dr. N Jagadeeswaran | Design and fabrication of bluetooth based solar grass cutter | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 90 | Sharantej reddy | Fabrication and modification of coconut tree sprayer | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 91 | Manjunath G | Manually operated hydraulic robotic arm | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 92 | Dr. Somasundar B | Structural analysis of Multitargetting Radar. | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 93 | Vinod R | Oxidation Stability of Waste Cooking Oil Methyl Ester | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 94 | Nagasuresh Babu | Application of lean six Sigma methodology in manufacturing organization | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 95 | Srinivas | Paddy threshing machine by manual and automated method | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 96 | Dharamendra | Pneumatic damping prosthetic leg for above knee amputees | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 97 | Madhu B P | SOLAR POWERED WEEDER USING WHITWORTH MECHANISM | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 98 | Dharamendra | Design and fabrication of MULTIPURPOSE SEED SOWING MACHINE | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 99 | Pradip Gunaki | Design and fabrication of Areca bunch separator | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 100 | Balaji S | Design and Analysis of ATV Chassis | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 101 | Pavan | Design and fabrication of atmospheric Water Generator for drinking | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 102 | Manjunath G K | Study of Adverse effects of cutting fluids in metal cutting and analysis. | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 103 | Rajesh Babu | Low cost paper pot transplanter for agriculture using solar power(I) | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 104 | Shanwaz Patil | Design and fabrication of Sterring controlled headlight. | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 105 | ArunKumar H | AUTOMATED WASTE SEGREGATION SYSTEM | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 106 | Dr. Niranjan H | Reduction in Sloshing Using Baffle Plate | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 107 | Dr. C D Hampali | DESIGN AND DEVELOPMENT OF SOLAR ELECTRIC TRICYCLE | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 108 | Nagasuresh Babu | OPTIMISATION OF PROCESS PARAMETERS OF PVD COATED CARBIDE TIP TOOLS (TiCN and TiAlN) BY TAGUCHI AND LEAN SIGMA TECHNIQUE | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 109 | channabasava | POWER GENERATION USING SPEED BREAKERS | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 110 | Vinod R | A Review on Thermal Comfort of a Room | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 111 | Shreyas | Remote Controlled Pesticide Sprayer | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 112 | Dr. Shamanth v | A REVIEW ON DIRECT METAL LASER SINTERING | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 113 | L R Jagadeesh | DESIGN AND DEVELOPMENT OF GANTRY ROBOT FOR OBJECT VALIDATION OF PALLETS | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 114 | Karthik S | IOT BASED MONITORING OF COMMUNITY BIOGAS PLANT FOR SMART CITY APPLICATION | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 115 | Karthik S | METERING AND CONTROLLING OF WATER SUPPLY USING GSM FOR SMART CITY APPLICATION | Journal of Emerging Technologies and Innovative Research | 2021 | 8 | UGC | |
| 116 | Dr. Somasundar B | Electrochemical studies of heat-treated NiCrMoFeCoAl and NiCrMoFeCoAl-30%Cr3C2 HVOF coatings on T22 boiler steel | Applied Ceramic Technology | 2021 | Web of science | ||
| 117 | Hanumantharaya R | Experimental Investigation and Optimization of Compression Molding Parameters for MWCNT/Glass/Kevlar/Epoxy Composites on Mechanical and Tribological Properties | Journal of Materials research nad Technology | 2021 | Web of science | ||
| 118 | Deepak S A | Simply supported polygon | IJVSS | 2021 | Scopus | ||
| 119 | Somasundaram B | Microstructural Characterization and Hot Corrosion Behavior of Plasma-Sprayed Fe17Cr2Ni0.18C/Fly Ash Cenosphere-Based Composite Coating (sae.org) | SAE Int Journal of materials and manufacturing | 2021 | WOS | ||
| 120 | Nithin S K & Hemanth K | Importance of Condition Monitoring in Mechanical Domain | Materials Today Proceedings | 2021 | Scopus | ||
| 121 | Srinivas S | Energy requirement for hybrid vehicles | Materials Today Proceedings | 2021 | Scopus | ||
| 122 | Srinivas S | Vibrational ANALYSIS OF Complex structures | Materials Today Proceedings | 2021 | Scopus | ||
| 123 | G. K. Manjunath | Effect of zinc content on the microstructure and mechanical properties of Al-Zn-Mg alloy | Materials Today Proceedings | 2021 | Scopus | ||
| 124 | Sharan Teja Reddy K | Effect of reinforcement on mechanical properties of silcon nitrate and Al 7455 | Materials Today Proceedings | 2021 | Scopus | ||
| 125 | Manjunatha G | Quasi-static uni-directional compression of Aluminium & Steel tubes between two flat platens for Energy absorption | Materials Today Proceedings | 2021 | Scopus | ||
| 126 | Ramesh kumar S C | Water Absorption Behavior of Hybrid Nano Natural Fiber Reinforced Composites | Materials Today Proceedings | 2021 | Scopus | ||
| 127 | Avinash.Srineevasan | Study on Mechanical Properties of AZ91 Magnesium Alloy | Materials Today Proceedings | 2021 | Scopus | ||
| 128 | RAGHAVENDRA B.S | EFFECT OF SURFACE TREATMENT ON TENSILE AND BUCKLING CHARECTERSITCS OF NATURAL FIBRE BASED HYBRID COMPOSITES | Materials Today Proceedings | 2021 | Scopus | ||
| 129 | B.Somasundaram | Microstructure Characteristics and Properties of WC-CrC-Ni HVOF Coating for Boiler Tube Steel | Materials Today Proceedings | 2021 | Scopus | ||
| 130 | S. MADHUSUDHANA & MLH | Study on Preparation and Mechanical Characterization of Functionally Graded Al2024-Albite Aluminum Matrix Composites Using Powder Metallurgy Technique | Materials Today Proceedings | 2021 | Scopus | ||
| 131 | Anilkumar P R MLH | Study on Mechanical Properties of Hybrid Epoxy Nano Composites Reinforced with Graphene and Nano Silica | Materials Today Proceedings | 2021 | Scopus | ||
| 132 | Harish Kumar N S, Manjunath C | Reliability, Availability and Maintainability Study of 6.5 cubic meters Shovel and 60 Tone Dumper in a Surface Limestone Mine | Materials Today Proceedings | 2021 | Scopus | ||
| 133 | Prabhakar C G, Anand Babu K | A review on Mechanical Properties of Banyan and Banana fibers composites. | Materials Today Proceedings | 2021 | Scopus | ||
| 134 | Shikha N Singh | ERGONOMICS CONTROL – ASSEMBLY STATION | Materials Today Proceedings | 2021 | Scopus | ||
| 135 | Madhu B P | Design and Development of 2D X-Y Platter with Pyrographic pen | Materials Today Proceedings | 2021 | Scopus | ||
| 136 | Arun Kumar H | Design and Fabrication of Finger Millet Cutting Machine | Materials Today Proceedings | 2021 | Scopus | ||
| 137 | Pradip Gunaki | Process Optimization by Value Stream Mapping | Materials Today Proceedings | 2021 | Scopus | ||
| 138 | Ashwini M V | Fabrication of Multi-Purpose Cast/Splint for Injury Recovery & Rehabilitation | Materials Today Proceedings | 2021 | Scopus | ||
| 139 | C Rajesh Babu | A Comprehensive Review On Compound Heat Transfer Enhancement Using Passive Techniques In A Heat Exchanger | Materials Today Proceedings | 2021 | Scopus | ||
| 140 | Arunkumar H | Effect of venture design on the performance of CNG and Biogas operated dual fuel engine with Jamun seed oil methyl ester blends | Materials Today Proceedings | 2021 | Scopus | ||
| 141 | Kalyana Kumar M | PERFORMANCE STUDY OF DIESEL ENGINE USING SILK WORM AND PONGAMIA PINNATA AT VARIOUS BLENDS | Materials Today Proceedings | 2021 | Scopus | ||
| 142 | Sachin Prabha | Research on Development of Ecofriendly & self-energizing Air-conditioner unit design over the Conservative technique | Materials Today Proceedings | 2021 | Scopus | ||
| 143 | Channabasav | Numerical analysis of laminar to turbulent transition boundary layer flow | Materials Today Proceedings | 2021 | Scopus | ||
| 144 | Veerbhadrappa Telgane | Dairy Scum Methyl ester production and its performance testing on a CI engine at different compression ratios | Materials Today Proceedings | 2021 | Scopus | ||
| 145 | Venkatagowda & MLH | Dynamic Mechanical Behavior of Natural Fibers Reinforced Polymer Matrix Composites – A Review | Materials Today Proceedings | 2021 | Scopus | ||
| 146 | Parameshwara & VBK | Numerical Vibroacoustic Analysis of Segmented Aluminum Fuselage of Aircraft with Blankets | Materials Today Proceedings | 2021 | Scopus | ||
| 147 | Dr Dasharth | Various Properties and Applications of Titanium Alloys | Materials Today Proceedings | 2021 | Scopus | ||
| 148 | Dr Dasharth | Performance, emission and combustion characteristics of a biogas–diesel dual fuel engine using Taguchi metho | Materials Today Proceedings | 2021 | Scopus | ||
| 149 | Manjunath G K | Effect of zinc content on the microstructure and mechanical properties of Al-Zn-Mg alloy | Materials Today Proceedings | 2021 | Scopus | ||
| 150 | Madhu B P | Design and Development of 2D X-Y Platter with Pyrographic Pen | Materials Today Proceedings | 2021 | Scopus | ||
| 151 | Rajesh K R | ERGONOMICS CONTROL – ASSEMBLY STATION | Materials Today Proceedings | 2021 | Scopus | ||
| 152 | Dasharath Mabrukar, | Various Properties and Applications of Titanium Alloys | Materials Today Proceedings | 2021 | Scopus | ||
| 153 | Dasharath Mabrukar, | Performance, emission and combustion characteristics of a biogas–diesel dual fuel engine using Taguchi method | Materials Today Proceedings | 2021 | Scopus | ||
| 154 | Shivashankara B S & VBK | Effect of processing route on grain refinement and mechanical properties in ECAP of Aluminium alloy AA7068 | Journal of mines metals and fuels | 2021 | Scopus | ||
| 155 | Chandra Mohan H K & Dr Devaraj S | Conventional Sintering of Copper Powder with and without Addition of Different Weight Percentage of Aluminium Powder | Journal of mines metals and fuels | 2021 | Scopus | ||
| 156 | Jegadeeswaran N | Characterization of Stellite-6 HVOF Coatings on Titanium Alloy | Journal of mines metals and fuels | 2021 | Scopus | ||
| 157 | Venkatesha B K | EFFECT OF CENOSPHERE ON MOISTURE ABSORPTION PERFORMANCE OF WOVEN HYBRID BAMBOO-GLASS FIBER REINFORCED EPOXY COMPOSITES | Journal of mines metals and fuels | 2021 | Scopus | ||
| 158 | Vinod kumar M S & Dr N Jegadeeswaran | Study of Solid Particle Erosion of Thermal Spray Coated and Uncoated Cobalt based Superalloy | Journal of mines metals and fuels | 2021 | Scopus | ||
| 159 | Deepak Kumar T & VBK | Performance and emissions characteristics of biodiesel in diesel engine | Journal of mines metals and fuels | 2021 | Scopus | ||
| 160 | Vinod R | EFFECT OF INJECTION TIMING ON THE PERFORMANCE OF CRDI DIESEL ENGINE FUELED WITH FISH OIL BIODIESEL AND ITS BLENDS DOPED WITH PYROGALLOL ANTIOXIDANTS | Journal of mines metals and fuels | 2021 | Scopus | ||
| 161 | Keerthi Kumar & Veerabadrappa | Combustion, Performance and Emission Characteristics of 4- Stroke Diesel Engine using Simarouba and graphene nanoparticles | Journal of mines metals and fuels | 2021 | Scopus | ||
| 162 | Deepak S A | Buckling Analysis of Thick Plates Using a Simple Higher Order Shear Deformation Theory | Journal of mines metals and fuels | 2021 | Scopus | ||
| 163 | Hanumantharaya R | MECHANICAL AND WEAR BEHAVIOUR OF FLY ASH REINFORCED EPOXY COMPOSITES | Journal of mines metals and fuels | 2021 | Scopus | ||
| 164 | Shanawaz Patil | Effect of Beryl and Graphene Nano Platelets Reinforcements on the Wear Behaviour of Al7075-Beryl Graphene Particulate Hybrid Composites | Journal of mines metals and fuels | 2021 | Scopus | ||
| 165 | Shreyas P S | Evaluating of Mechanical Properties for Aluminium Based Hybrid Composites Reinforced With Al2O3 & ZrO2 Nano Particles | Journal of mines metals and fuels | 2021 | Scopus | ||
| 166 | R Raghavendra Rao & Avianash S | Effect of fiber orientation on the mechanical properties of unidirectional Basalt fiber reinforced polymer matrix composites | Journal of mines metals and fuels | 2021 | Scopus | ||
| 167 | Deepak Kumar T & VBK | Performance and emission characteristics of a diesel engine using Bio diesel blended with Nano additives | Journal of mines metals and fuels | 2021 | Scopus | ||
| 168 | Dinesha Kumara HM & CDH | CFD Analysis of combustion liner with different Geometry holes for Effussion film cooling | Journal of mines metals and fuels | 2021 | Scopus | ||
| 169 | Shashidhara L C & Dr KSN | Mixed-Mode Fracture (KI & KII) Evaluation in Epoxy Resin using ASENB Configuration | Journal of mines metals and fuels | 2021 | Scopus | ||
| 170 | Nagayya & VBK | STRENGTH AND FAILURE ANALYSIS OF CARBON FIBER REINFORCED POLYMER (CFRP) AND TITANIUM(TI) ALLOY AXISYMMETRIC LAP JOINT | Journal of mines metals and fuels | 2021 | Scopus | ||
| 171 | MANJUNATHA | Effects of Aluminium, Zirconium and Fly-ash mixture coated on EN8-Steel and Study the Three Body Abrasive Wear Behavior of EN8-Steel | Journal of mines metals and fuels | 2021 | Scopus | ||
| 172 | Sachin Prabha | DEVELOPMENT AND CHARACTERIZATION OF POLYMER MATRIX COMPOSITES USING POLYESTER, HEMP AND CALCIUM SILICATE | Journal of mines metals and fuels | 2021 | Scopus | ||
| 173 | S Prashantha Dr Shanwaz | Effect of Hydrogen Embrittlement on the characteristics of Copper-based Shape Memory Alloy | Journal of mines metals and fuels | 2021 | Scopus | ||
| 174 | Rizal Mohamed Noor & Dr Pramod Kumar | Optimization of Cutting Parameters To Improve Power Consumption And Material Removal Rate In High Efficient Milling | Journal of mines metals and fuels | 2021 | Scopus | ||
| 175 | Balaji.S | PERFORMANCE AND NOX EMISSIONS OF MAHUA ESTER BLENDS WITH PYROGALLOL ANTIOXIDANT IN A SINGLE CYLINDER DIESEL ENGINE | Journal of mines metals and fuels | 2021 | Scopus | ||
| 176 | Varadaraj K | Performance and Emissions Analysis of Diesel Engine Fueled with Exhaust Gas Energy Preheated ROME Biodiesel | Journal of mines metals and fuels | 2021 | Scopus | ||
| 177 | R Vara Prasad Kaviti &Rameshkumar SC | INVESTIGATION OF WEAR BEHAVIOR OF MAGNESIUM REINFORCED WITH BORON NITRIDE NANOCOMPOSITE USING ANN | Journal of mines metals and fuels | 2021 | Scopus | ||
| 178 | Kadir A Ajij Shaikh | PRODUCTION AND CHARACTERIZATION OF TITANIUM BASED METAL MATRIX COMPOSITES: A REVIEW | Journal of mines metals and fuels | 2021 | Scopus | ||
| 179 | Madeva Nagaral & Dr Shanawaz | Influence of Micro Graphite Particles on the Microstructure and Wear Behavior of Aluminium 6061 Alloy Composites Developed by Two Step Casting Process | Journal of mines metals and fuels | 2021 | Scopus | ||
| 180 | Nithin H S & Anand babu | Comparative study on high temperature oxidation behaviour of CoCrAlY coatings by various reinforcement composition profile analysis | Journal of mines metals and fuels | 2021 | Scopus | ||
| 181 | AMAR GANDGE SUBASH &CD Hampali | DESIGN AND NUMERICAL ANALYSIS ON SUPER SONIC ROCKET NOZZLE | Journal of mines metals and fuels | 2021 | Scopus | ||
| 182 | Mahadev & Pavan D | Modeling and Structural Analysis of Bicycle Frame Using FEA for Different Materials | Journal of mines metals and fuels | 2021 | Scopus | ||
| 183 | Sanman S & VBK | EFFECT OF PERCENTAGE OF REINFORCEMENT PARTICULATES ON THE CORROSION BEHAVIOR OF ALUMINUM BORON CARBIDE COMPOSITES | Journal of mines metals and fuels | 2021 | Scopus | ||
| 184 | Rakesh C M & NCH | A STUDY ON PERFORMANCE OF SURFACE MODIFIED NACA 2412 AIRFOIL AT VARIOUS REYNOLD’S NUMBER AND ANGLE OF ATTACKS | Journal of mines metals and fuels | 2021 | Scopus | ||
| 185 | Vinod R | A Comparative Study of Biodiesel Production by Microwave assisted and conventional Transesterification methods | Journal of mines metals and fuels | 2021 | Scopus | ||
| 186 | T S Raghu & Kalyankumar | A Study on The Applications of Vibratory Motor for Material Handling Vehicles | Journal of mines metals and fuels | 2021 | Scopus | ||
| 187 | Prashanth K P & VBK | STUDY OF THERMAL STABILITY AND ADHESION PROPERTY OF CHITOSAN BASED BIODEGRADEBLE COMPOSITE | Journal of mines metals and fuels | 2021 | Scopus | ||
| 188 | HARSHA.S, Dasharath S M | Investigation On Mechanical Properties of Aluminium 8090 Alloy Through Room Temperature Rolling | Journal of mines metals and fuels | 2021 | Scopus | ||
| 189 | Praveen Math | A STUDY ON EFFECT OF CO2 WELDING PROCESS PARAMETER ON MICROHARDNESS OF STRUCTURAL STEEL | Journal of mines metals and fuels | 2021 | Scopus | ||
| 190 | Arunkumar H | Effect of venture design on the performance of CNG and Biogas operated dual fuel engine with Jamun seed oil methyl ester blends | Journal of mines metals and fuels | 2021 | Scopus | ||
| 191 | G. K. Manjunath | Optimization of processing conditions in equal channel angular pressing for superior structure and properties | Journal of mines metals and fuels | 2021 | Scopus | ||
| 192 | Pradip Gunaki | UTILIZATION OF INDIAN RAILWAY BIO-TOILET WASTE AS AN AGRICULTURE FERTILIZER | Journal of mines metals and fuels | 2021 | Scopus | ||
| 193 | Dr Suresh S | STATIC STRUCTURAL AND LINEAR BUCKLING ANALYSIS OF DIESEL GENERATOR CONNECTING ROD | Journal of mines metals and fuels | 2021 | Scopus | ||
| 194 | Ashwini | Modern cast/splint for external physical injuries & rehabilitation | Journal of mines metals and fuels | 2021 | Scopus | ||
| 195 | Dr Vijeekumar | Synthesis of ceramic-based composite | Journal of mines metals and fuels | 2021 | Scopus | ||
| 196 | Dr. Niranjan H | Experimental investigation for the determination of material properties of a composite laminate using resin and DIC techniques | Materials Today Proceedings | 2021 | Scopus | ||
| 197 | Dr. Niranjan H | Design and Analysis of Different Solar Still Structures†| Journal of Emerging Technologies and Innovative Research | 2021 | 9 | UGC | |
| 198 | Dr. Shamanth v | Voltammetric Determination of Various Food Azo Dyes Using Different Modified Carbon Paste Electrodes | Biointerface Research in Applied Chemistry | 2021 | WOS | ||
| 199 | Dr. Somasundar B | Microstructure Characteristics and Properties of NiCrMoFeCoAl HVOF Coating for T22 Boiler tube Stee | Materials Today Proceedings | Scopus | |||
| 200 | Vinod kumar M S & Dr N Jegadeeswaran | Study of Solid Particle Erosion of Thermal Spray Coated and Uncoated Cobalt based Superalloy | Journal of mines metals and fuels | Scopus | |||
| 201 | Prabhakaran D and Jegadeeswaran N | Oxidation Resistance by HVOF Coating on MDN steel of turbine materials | Journal of mines metals and fuels | Scopus | |||
| 202 | Nalinikumari & Jegadeeswaran N | Development of CNT Mixed HVOF coating for Water tube boiler material to improve the degradation | Materials Today Proceedings | Scopus | |||
| 203 | Sharan Teja Reddy K | Study of dual grain microstructure heat treatment in steel specimen representing gas turbine rotor disc | Materials Today Proceedings | Scopus | |||
| 204 | Sharan Teja Reddy K | Concentration of gold nanoparticles at near Zero-cost | Materials Today Proceedings | Scopus | |||
| 205 | Suresha S | Tribological characteristics of Al6061, boron, and graphite hybrid metal matrix composites | Advances in Materials and Processing Technologies | WOS | |||
| 206 | Sachinkumar Patil | Coatings | Materials Today Proceedings | Scopus | |||
| 207 | Dr. Manjunath L H | Development Of Al 6061 Mwcnt MMMC Processed By Multi-Directional Forging | Materials Today Proceedings | Accepted | Scopus | ||
| 208 | Varun Kumar Reddy | Performance and emission evaluation of diesel engine fuled with exhaust gas energy preheated CAOME biodisel | Materials Today Proceedings | Accepted | Scopus | ||
| 209 | N Jagadeeswaran | Effect of carbon nanotubes on microhardness and adhesion strength of high-velocity oxy-fuel sprayed NiCr-Cr3C2 coatings | WOS | ||||
